Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

  • 0

03 Suburban Performance


MBurke

Question

Hello, We have a 2003 Chevy suburban with 73k miles. Looking at two things....What about the K&N Air Filter kits ? Do they do what they claim ? Improve gas millage a little and improve the torque ?

And looking for some good floor mats and cargo mats. Does anyone use mats that Cabelas sell ??

Does anyone have any suggestions on either one of these items ?? Or have any other suggestions on improving performance.

Thanks

Mike

Link to comment
Share on other sites

8 answers to this question

Recommended Posts

  • 0

I am not comparing apples to apples here, but I had an 02 S-10 with the 4.3 V6 and an auto. I installed the air raid cold air intake as well as a throttle body spacer. Before the install I was averaging 19 mpg and after I got 21 mpg. I kept a log of every tank of gas I put in and it was a noticable difference on gas mileage. Now as far as torque, my trusty butt dyno told me there was more power there, but it really isn't going to be enough to notice, unless you put it on an actual dyno to see the numbers, you wont notice much. The increase in mileage alone was worth it to me, as I was putting on 45,000 miles a year at the time.

Link to comment
Share on other sites

  • 0

I am also not a big fan of K&N filters. The big reason is the majority of the ones I see are neglected. In order for these to work they need to be cleaned which seems to be the problem. Then there is the initial cost. If you figure out how many regular air filters you can buy and your current mileage vs. the cost of the filter and the mileage savings and the cleaning/maintenance is it really worth it?

The other thought is ford has a TSB out for MAF sensor contamination from over oiled "high flow" filters. If they are over oiled the oil particles can collect on the MAF sensor which will attract dirt wich will ultimately mess up the signals it gives out wich leads to some funky driveabilty issues.

Link to comment
Share on other sites

  • 0

Definitely good point Airjer. They do have to be cleaned regularly, and they do have to be taken care of. I never really had any problems with mine, cleaned it about every 8-12 weeks and it worked fine, but I can see what you are talking about with other people I know that run them.

The initial cost part is why I went with the air raid intake versus the K&N. I got the filter kit and the throttle body spacer for under 300 bucks, where as the K&N kit was like 275 alone for my truck. Most of the cold air intake kits will work pretty equally, but there are differences. If you do decide to purchase one, make sure you do some research.

Link to comment
Share on other sites

  • 0

I've had Husky Liner molded floor mats in my truck for about 4 yrs now and have had good luck with them. If you search around online you can find decent prices on them.

Link to comment
Share on other sites

  • 0

I had an 02' Suburban and was in the same boat..Not enough power for towing. Thought about getting one of the chips, or filter, exhaust combo...I didn't really care for the ride though when towing either...Ended up getting a 3/4 ton burb with the 8.1 motor..No more performance worries.. grin.gif

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • Truly sorry to hear that duffman! I know that feeling.  Keep the good memories  
    • Chamois passed away this weekend a couple days short of her 13th bday. What a great dog to hang out with here at home and on distant adventures. Gonna miss ya big time my little big girl.
    • Sounds pretty sweet, alright. I will check them out, thanks.
    • If you really want to treat your wife (and yourself) with a remote operated trolling motor, the Minn Kota Ulterra is about easy as it gets.  Auto stow and deploy is pretty awesome.  You just have to turn the motor on when you go out and that the last time you have to touch it.   24V 80lb.  60 inch shaft is probably the right length for your boat.  They ain’t cheap - about $3k - but neither one of you would have to leave your seat to use it all day.
    • Wanderer, thanks for your reply. I do intend for it to be 24 volt, with a thrust of 70-80. Spot lock is a must (my wife is looking forward to not being the anchor person any more).  With my old boat we did quite a lot of pulling shad raps and hot n tots, using the trolling motor. Unlikely that we will fish in whitecaps, did plenty of that when I was younger. I also need a wireless remote, not going back to a foot pedal. We do a fair amount of bobber fishing. I don't think I will bother with a depth finder on the trolling motor. I am leaning toward moving my Garmin depth finder from my old boat to the new one, just because I am so used to it and it works well for me. I am 70 years old and kinda set in my ways...
    • Dang, new content and now answers.   First, congrats on the new boat!   My recommendation is to get the most thrust you can in 24V, assuming a boat that size isn’t running 36V.  80 might be tops?  I’m partial to MinnKota.     How do you plan to use the trolling motor is an important question too.     All weather or just nice weather?   Casting a lot or bait dragging?   Bobber or panfish fishing?   Spot lock?  Networked with depth finders?  What brand of depth finders?
    • We have bought a new boat, which we will be picking up this spring. It is an Alumacraft Competitor 165 sport with a 90 horse Yamaha motor. I will be buying and installing a trolling motor,  wondering if I can get some recommendations on what pound thrust I will want for this boat?  Also, I will be selling my old boat, is there a good way to determine the value on an older boat ( mid-80's with a 75 horse 2-stroke  Mariner motor)  I will appreciate any help with these questions.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.