Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

  • 0

Abu Garcia Revo SX


midwesthunter

Question

I am in the market for a new baitcaster for the upcoming season. I want something that I can use for trolling cranks for walleye or casting spinners/smaller cranks for smallies. Does anyone have any epxerience with the Revo SX? Should i be concerned about line capacity at all? Right now I am using an Ambassadeur C3 and it works, but I would like to upgrade to something a little smoother and can cast small shad raps.

Any advice is greatly appreciated.

Link to comment
Share on other sites

7 answers to this question

Recommended Posts

  • 0

Ive played with the sx at work mostly pitching bass jigs and it was smooth. Line capacity shouldnt be a huge issue. What pound test were you going to run? The one problem you might run into is casting small shad raps. They are light and light lures dont always work well with baitcasters. You may run into casting distance or backlash problems. The revos come in two gear ratios 6:1 and a faster 7:1. The slower 6:1 ration would better suit someone casting cranks and actually many fisherman prefer gear ratios even slower, 5:1 or sometimes less.

Link to comment
Share on other sites

  • 0

I have a Shimano Curado D200, and it is great for anything down to worms with no weight or very light weight - like 1/16th oz plus hook. I do have it on a nice medium light rod, using 12# power pro. I also use C3 and C4 and C5 reels, and like them alot. BUT, you will really like the low profile reels if you haven't used them yet. Very comfy.

I am actually going to try a REVO SX or STX if I can get a deal on one. But you can't go wrong with Curado either, but a bit more $$.

I use it mostly for smallies on a small clear lake up north, but also on WBL for largemouth or snakes \:\)

Link to comment
Share on other sites

  • 0

I received a revo sx (left handed model) for fathers day last year and I can throw a 1/8 ounce jig and plastic (not far, maybe 18 yards) but I have a medium light rod. 1/4 ounce and up, no problem. OUTSTANDING reel. If I was going to buy another baitcasting reel, it would be another REVO SX. I have used mine to troll for walleyes and northerns, casting for bass, and I also used it stream fishing in small streams with a 5'6" pistol grip casting rod. That reel was made for pistol grips, especially that 5'6" one. Lots of fun.......

Link to comment
Share on other sites

  • 0

I messed around with a Shimano Curado D at Gander Mountain tonight. I think this may be the reel for me. There is also a $50 mail in rebate for this reel which is definately a bonus.

Does anyone have any good or bad things to say about this reel?

Thanks

Link to comment
Share on other sites

  • 0

I love my Curado. One thing, the braking system is different than other "point and shoot" baitcasters. They have these little "brake weights" that you need to put on, and they are adjustable. It is very easy to do, but very important to set them where you want them. The first time I used mine, I did not have any of them on, and I could not figure out why I got backlash EVERY cast. No kidding, and it was not my first rodeo with a baitcaster ;\)

But once I put them on, holy cow, smoooooooth and long casts with what seems like no chance for a backlash. FWIW, I bought NIB from an online friend who is a big reel geek. He purged the bearings of all grease, and I added my own oil to the bearings. This is what the bass guys do, and the competitive casters, etc. due to the grease the manuafactures put on is thicker and meant to make sure the bearing have lubrication over the course of the reels life, since most people never maintain or oil their bearing. So now I must make sure to oil bearings at least once a year. But holy cow, can you tell a different between a stock bearing and one that has been totally cleaned then oiled.

So, not saying you have to do this with Curados, cause you don't (my stepson has one stock andit a great). But many with some of the higher end reels will "tweak" them to make them even better. The Curado, while high end in my book, is basically like the lower end of the true "high end" reels. Heads and shoulders above most baitcasters that most of us use.

Get it and enjoy it! \:\) Also, All American Outdoors is a sponsor of this site, and they have good prices. If the rebate will work with them, you cound get a Curado really darn cheap.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • Truly sorry to hear that duffman! I know that feeling.  Keep the good memories  
    • Chamois passed away this weekend a couple days short of her 13th bday. What a great dog to hang out with here at home and on distant adventures. Gonna miss ya big time my little big girl.
    • Sounds pretty sweet, alright. I will check them out, thanks.
    • If you really want to treat your wife (and yourself) with a remote operated trolling motor, the Minn Kota Ulterra is about easy as it gets.  Auto stow and deploy is pretty awesome.  You just have to turn the motor on when you go out and that the last time you have to touch it.   24V 80lb.  60 inch shaft is probably the right length for your boat.  They ain’t cheap - about $3k - but neither one of you would have to leave your seat to use it all day.
    • Wanderer, thanks for your reply. I do intend for it to be 24 volt, with a thrust of 70-80. Spot lock is a must (my wife is looking forward to not being the anchor person any more).  With my old boat we did quite a lot of pulling shad raps and hot n tots, using the trolling motor. Unlikely that we will fish in whitecaps, did plenty of that when I was younger. I also need a wireless remote, not going back to a foot pedal. We do a fair amount of bobber fishing. I don't think I will bother with a depth finder on the trolling motor. I am leaning toward moving my Garmin depth finder from my old boat to the new one, just because I am so used to it and it works well for me. I am 70 years old and kinda set in my ways...
    • Dang, new content and now answers.   First, congrats on the new boat!   My recommendation is to get the most thrust you can in 24V, assuming a boat that size isn’t running 36V.  80 might be tops?  I’m partial to MinnKota.     How do you plan to use the trolling motor is an important question too.     All weather or just nice weather?   Casting a lot or bait dragging?   Bobber or panfish fishing?   Spot lock?  Networked with depth finders?  What brand of depth finders?
    • We have bought a new boat, which we will be picking up this spring. It is an Alumacraft Competitor 165 sport with a 90 horse Yamaha motor. I will be buying and installing a trolling motor,  wondering if I can get some recommendations on what pound thrust I will want for this boat?  Also, I will be selling my old boat, is there a good way to determine the value on an older boat ( mid-80's with a 75 horse 2-stroke  Mariner motor)  I will appreciate any help with these questions.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.