- 0
-
Popular Now
-
- 2,395 replies
- 320,499 views
-
-
Your Responses - Share & Have Fun :)
-
-
Sorry to hear that Duff. Will give my GSP's an extra scratch behind the ear for you guys today -
Aw, man, sorry to hear that. Shed some tears and remember her well. They all take a piece of our hearts with them; some more than others. -
-
Truly sorry to hear that duffman! I know that feeling. Keep the good memories
-
Chamois passed away this weekend a couple days short of her 13th bday. What a great dog to hang out with here at home and on distant adventures. Gonna miss ya big time my little big girl. -
By Crow Hunter · Posted
Sounds pretty sweet, alright. I will check them out, thanks. -
If you really want to treat your wife (and yourself) with a remote operated trolling motor, the Minn Kota Ulterra is about easy as it gets. Auto stow and deploy is pretty awesome. You just have to turn the motor on when you go out and that the last time you have to touch it. 24V 80lb. 60 inch shaft is probably the right length for your boat. They ain’t cheap - about $3k - but neither one of you would have to leave your seat to use it all day.
-
By Crow Hunter · Posted
Wanderer, thanks for your reply. I do intend for it to be 24 volt, with a thrust of 70-80. Spot lock is a must (my wife is looking forward to not being the anchor person any more). With my old boat we did quite a lot of pulling shad raps and hot n tots, using the trolling motor. Unlikely that we will fish in whitecaps, did plenty of that when I was younger. I also need a wireless remote, not going back to a foot pedal. We do a fair amount of bobber fishing. I don't think I will bother with a depth finder on the trolling motor. I am leaning toward moving my Garmin depth finder from my old boat to the new one, just because I am so used to it and it works well for me. I am 70 years old and kinda set in my ways... -
Dang, new content and now answers. First, congrats on the new boat! My recommendation is to get the most thrust you can in 24V, assuming a boat that size isn’t running 36V. 80 might be tops? I’m partial to MinnKota. How do you plan to use the trolling motor is an important question too. All weather or just nice weather? Casting a lot or bait dragging? Bobber or panfish fishing? Spot lock? Networked with depth finders? What brand of depth finders?
-
-
Topics
-
Question
Fish Fry Guy
I have a 49cc Magnum III Plus auger with a Tecumsah engine & a Walbro carburator that sat all summer with gas in the tank. I am gearing up for the winter fishing season but I now have a problem getting fuel into the engine. When I try to start it up, there is no fuel going through the fuel line at all. I'm thinking that the fuel got all gummed up over the summer, any thoughts on how to fix this? I opened up the carburator but it looked clean. I didn't take it completely off, just opened up the choke flap but I did take a look at one of the gaskets and again, it all looked clean. Any suggestions? Thanks
Link to comment
Share on other sites
2 answers to this question
Recommended Posts