Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Battery operated ice auger??


friskylizard

Recommended Posts

I’m tired of the hassle of maintaining and starting my gas auger (its older) and thought of buying a new one but just don’t want to put down the money. So, I have a 36v dewalt cordless drill (I’m a contractor) and why not use it as a battery operated ice auger. Has anyone tried this before??

Link to comment
Share on other sites

Quote:

they work ok if your only going to drill 1-2 mud or tabby catholes....anymore than that they just can't keep up.


They are awesome! Depending on temperature I'll get between 15 and 25 holes threw a foot of ice on one charge I carry an extra battery so 30 to 40 holes is not a problem.

Thats with an 18 volt Dewalt and 6" Lazer mag a good battery/Drill and sharp blade are Key.

I bought it mainly for early Ice up to a foot but had such great success I used it pretty much the hole year the last 2 seasons.

Most of the disgruntled users have poor drills and dull augers.

I just love pulling out my drill/auger and having 6 holes drilled before the other guys have their stinky loud heavy Gas augers running. grin.gif it's just hillarius the looks on peoples faces when I pull it out and just bang out the holes one after another.

That being said I still have my 3hp Gas when I really need it.

Did I say its super light and easy to transport also...

The adapter was $20 I already had the drill so it was well worth it to me.

Friskylizard you will be extremely happy with your 36 volt setup I went with a 6" Lazer and had no troubles with big fish "8lb Eye, 36" northern" but may try a 7" this year. grin.gif

Link to comment
Share on other sites

Good idea!

I have been looking for an elec. auger idea! I hate the 15-20 minute fresh air clean out of the perm. shack up Mille laces. It sucks when you are warming up the house after fisrt getting their.

Link to comment
Share on other sites

The problem with that Shack is the bigger you go in diameter the harder it is to drill I use a 6" an 8" is going to be a lot tougher plus if your house is on blocks it gets tougher with thicker ice with a shorter hand auger like I use, I suppose an extension would help.

I use it more for portable fishing and I don't think its cost effective for someone to go out and buy a $300 Dewalt Drill a $70 Lazer mag and the adapter for $20.

For that kind of money your into one of the Jiffy or Strikemaster Electrics if you want to go that route.

Again the keys are a GOOD/Fresh battery and Drill along with a Sharp Auger and I always bring my Handle for the Hand auger incase the Drill or Batterys fail.

A magnet and a long rope are not a bad Idea either...DOAH!

Link to comment
Share on other sites

I thought it was a good idea, because I have all three items.

It is worth a try, before I get an exhaust tube or elec. auger.

Thanks again.

P.S.

I have put up smoke for 10 years now! If drill idea fails, I will probably just go back to old method.

Link to comment
Share on other sites

Quote:

i just seen a
HSOforum
that featured these things called icegators, its a electric drill that is supposed to be able to drill 90 holes through 15 inches of ice on one charge.try (Contact Us Please).com BT


Yeah, that thing rocks. To clarify, I think calling the ice gator an electric ice auger would be a little more accurate. The word drill could be a little misleading. I myself misuderstood your post the first time I read it.

Link to comment
Share on other sites

You're right Sonic I should have worded it better, sounds like a cool little machine. However it only let's you drill up to a 6 inch hole,I do like the reverse idea that shoots the ice back under the hole instead of leaving slush in the hole. I hope in a year or two they will come out with a more powerful unit that will allow you a 7 or 8 inch hole. This may spark my interest in one of these.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • Sounds pretty sweet, alright. I will check them out, thanks.
    • If you really want to treat your wife (and yourself) with a remote operated trolling motor, the Minn Kota Ulterra is about easy as it gets.  Auto stow and deploy is pretty awesome.  You just have to turn the motor on when you go out and that the last time you have to touch it.   24V 80lb.  60 inch shaft is probably the right length for your boat.  They ain’t cheap - about $3k - but neither one of you would have to leave your seat to use it all day.
    • Wanderer, thanks for your reply. I do intend for it to be 24 volt, with a thrust of 70-80. Spot lock is a must (my wife is looking forward to not being the anchor person any more).  With my old boat we did quite a lot of pulling shad raps and hot n tots, using the trolling motor. Unlikely that we will fish in whitecaps, did plenty of that when I was younger. I also need a wireless remote, not going back to a foot pedal. We do a fair amount of bobber fishing. I don't think I will bother with a depth finder on the trolling motor. I am leaning toward moving my Garmin depth finder from my old boat to the new one, just because I am so used to it and it works well for me. I am 70 years old and kinda set in my ways...
    • Dang, new content and now answers.   First, congrats on the new boat!   My recommendation is to get the most thrust you can in 24V, assuming a boat that size isn’t running 36V.  80 might be tops?  I’m partial to MinnKota.     How do you plan to use the trolling motor is an important question too.     All weather or just nice weather?   Casting a lot or bait dragging?   Bobber or panfish fishing?   Spot lock?  Networked with depth finders?  What brand of depth finders?
    • We have bought a new boat, which we will be picking up this spring. It is an Alumacraft Competitor 165 sport with a 90 horse Yamaha motor. I will be buying and installing a trolling motor,  wondering if I can get some recommendations on what pound thrust I will want for this boat?  Also, I will be selling my old boat, is there a good way to determine the value on an older boat ( mid-80's with a 75 horse 2-stroke  Mariner motor)  I will appreciate any help with these questions.
    • Sketti...  not out of a jar either!
    • Lol yeah I watched that
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.