Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Rusk County Musky Fishing?


Recommended Posts

A good buddy of mine recently moved to Rice Lake. As an avid Musky hunter, I see the DNR says there are some good lakes in that area...Potato, Island, McCann, Big Falls Flowage..anyone have any experiences on these or other lakes in the area? Email is [email protected], any help would be appreciated, Thank you

Link to comment
Share on other sites

I've fished Potato and the Island/Chain lakes. Potato seems to have slowed the past few years for both numbers and especially size although its still a good musky lake - just not as good as it once was. It gets green in the summer heat. On the Chain I've fished mostly McCann and Chain and its nice water to fish - nice weeds plus rock points to fish. The sleeper in the area is Rice Lake itself, has been putting out some real nice fish the past few years.

Fireside, Sand, and Amacoy are also good musky lakes in the area. Long Lake off of Hwy 40 is clear and can be tough to fish but has some dandies - the cabbage weeds are making a comeback there. Try Long at night wink.gif

Link to comment
Share on other sites

I have family in Bruce, and talking to local fisherman, they are surrounded by good Musky water. I am going to out there tommorrow, I"ll ask around for you ans get back to you!.Family is on the Chip. and I'm going to go for some 'eye's. Also, thank you for the previous info tunrevir, it helped a lot. Good fishing everyone and I"ll check bach w/ any info I get! I will from time to time have an open seat. I"ll post on this sight.

Link to comment
Share on other sites

Thanks for the info guys.

I will be heading up in that vicinity Tuesday after Memorial Day when the tourists go bye bye, there very well might be an open seat in my boat for a day or two if anyone has any interest as well. One of those days I am trekking up to Amnicon finally too

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.