Ham Posted April 25, 2007 Share Posted April 25, 2007 power trim worked last winter before storage, pull out of barn over weekend motor will not go up or down. can hear ele motor run. how do i get motor to fluid Link to comment Share on other sites More sharing options...
0 Valv Posted April 25, 2007 Share Posted April 25, 2007 We need to know which motor brand, year, and model. Link to comment Share on other sites More sharing options...
0 Shack Posted April 26, 2007 Share Posted April 26, 2007 Should be a fill and level plugs on side or top of unit or resivor. What kind of unit do you have? Does it move at all? Link to comment Share on other sites More sharing options...
0 Ham Posted April 26, 2007 Author Share Posted April 26, 2007 92 Mariner The drain plug did break the small end in pump. Is that why it wont go up and down but make noise. It worked when I put it away. Very new to this. Link to comment Share on other sites More sharing options...
0 Shack Posted April 26, 2007 Share Posted April 26, 2007 Can you see any leakage? The noise you hear is most likely to be caused by "air" in system. You need to get air out of there. Fill reservoir with proper type of fluid. If their is a bleeding process posted on unit follow this. I know some only require filling reservoir and running unit up and down until full travel is achieved. Good Luck. Link to comment Share on other sites More sharing options...
0 Ham Posted April 26, 2007 Author Share Posted April 26, 2007 Ok thanks for the info Link to comment Share on other sites More sharing options...
Question
Ham
power trim worked last winter before storage, pull out of barn over weekend motor will not go up or down. can hear ele motor run. how do i get motor to fluid
Link to comment
Share on other sites
5 answers to this question
Recommended Posts