Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Recommended Posts

Anybody here around the bay fishing the inland lakes? What is the ice condition? I'd like to get out. I heard that last weekend there was someone out a couple hundred feet on the pond at Drummond. Any info will be appreciated.

Jim

Link to comment
Share on other sites

Jim

I have been out a few times now.. Ice conditions on MOST lakes are good to go for foot travel. And all lakes varied for ice conditions. Some had three to 4 inches, others were 4 to 5 inces. And with that, the bigger lakes were still a bit thin over the deeper water when I checked. Deeper water was 20FOW or more.

Be sure to use a spud and check as you go. Also, would be wise to fish with a friend. Definately is a weird year for ice up.

Link to comment
Share on other sites

Thanks for the reply.

I went out to the Delta area today. Saw some folks out on the Pike Lake Chain and on Bluebird. I did spud Delta Lake and there was 5 inches on it. There were tracks of others that had been there.

Jim

Link to comment
Share on other sites

Bass & Bellevue ice was sketchy today, anywhere from 2-6". Some of the 2" was very soft, I made sure to avoid it. Fishing sucked. Drilled 70+ holes this morning and did not mark a single fish. Did some spudding on Buskey bay and it looked pretty solid, didn't have enough time to fish it though.

Link to comment
Share on other sites

Bellevue does have some good Pumpkinseeds Cheffrey... 'Gills and Crappies I have caught in there have been pretty small, but the pumpkins were very nice...

Shoot me an e-mail and we can discuss some lakes if you want...

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • As a recovering machinist, I can appreciate that.  If the spec is 0.001 - 0.0015, then clearly the correct measurement is 0.00125, duh…
    • I just figured that it is easy enough to just get a 3 bank so when the boat is not in use I can keep all 3 batteries charged. I have not bough a charger yet, maybe I will give it some more thought. Edit: After thinking this over, with the size, weight, and heat output of the charger (as well as the cost) I think it makes sense to just buy a 2 bank charger, I have a smaller charger i can use on the starting battery when the boat is sitting at home. Forgive me, for i am a retired engineer and I have to obsess over everything...
    • Congrats on the motor!  I think you’ll like it.   I can’t say much on the charger location but I’ve seen them under the lid in back compartments and under center rod lockers.  160 degrees is more than I expected to hear.   Curious why you’re opting for a 3 bank charger with a 24V trolling motor.  Unless you don’t feel you be running you big motor enough to keep that battery up as well?
    • I did buy an Minnkota Ulterra, thanks for the recommendations. I had a bunch of Cabela"s bucks saved up, which helped. Now i need to get an onboard battery charger. Where do you guys mount these things in your boat? The manufacturer I am looking at {Noco genius) says tht their 3-bank charger will run at 160 degrees, seems like a lot of heat in an enclosed compartment? Thanks for any input on this.
    • You're very lucky a troop of Sea Monkey's didn't carry you away.   
    • Wasn't terrible at a state park beach. Antelope island maybe.  I wouldn't recommend it as a beach destination tho.  Figured I was there, I'm getting in it.
    • The water looked and smelled disgusting with hundreds of thousands of birds sh*tting in there.  About as gross as the Salton Sea. When I duck hunted there I didn't even want to touch the water.
    • It's kinda gross with the algae in the summer but I got in it anyway.  Wanted to see the increased bouyancy at work.  You can kinda tuck yourself into a ball and you'll just float with your head above water.  When dry off you look diamond encrusted with the salt.
    • We went to the flats too. I dipped a tire on the rental car onto it just to say I’ve been there,but it was still pretty soft from winter melt. After seeing some moron in a BMW suv get dragged out of the muck I had no intention of repeating his stupidity. 
    • I've been out on the flats. It's like being on a different planet 
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.