Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Propane Heater or Wood Stove


bgfish00

Recommended Posts

My Old Barrel Heater went out and I want to replace it. I am pricing out and Looking for Pros and Cons to Either the Vented Propane Heater or Wood Stove for Camper/Fishouse. I am looking at one of those tent stoves for wood or a Vented/Non Vent Propane Heaters. And I need to get it in this week so install needs to be quick...Any Ideas.

Link to comment
Share on other sites

I realy don't think wood is that cheep once you fugure in gas,time,oil,ect.

If your going to sleep in the shack vented is the only way to go, you will have a few guy say they have non vented heaters and they have slept in there shacks without proplems, I for one realy don't want to take the chance.

LP is just ez'r to deal, cut and dry

Link to comment
Share on other sites

Everyone likes the smell and crackle of a nostalgic wood fire. Other than that, a vented LP wins hands down. It's easier to start and regulate. None of that 100* one minute, 30* the next. And for a sleeper I'd hate to get up and add wood in the night.

Link to comment
Share on other sites

If you are looking for something beside just heat, wood is a good way. But gas has to be the way to go as so very many shantys use gas. You can't fight with those odds. A wood burner would set your shack apart from the rest but not the most pratical way.

Good Luck!

Link to comment
Share on other sites

Go with the vented. We have a woodstove in our sleeper now and it can be a pain in the butt.I love it during the day but it is sorely lacking at night. Hauling wood...laying on your back gasping for air when its 140 degrees in the top bunk at night only to wake up at 4 in the morning and its -20(literally).

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
    • Chef boyardee pizza from the box!
    • Or he could go with leech~~~~~
    • Bear can relate too. Tell Leech to start a new account named Leech5, we'll know who he is.If he has any trouble, Bear can walk him through it.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.