Jump to content

  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

  • 0

Vexilar repair in SW metro

Deepinthewoods

Asked by Deepinthewoods,

 Share

Question

5 answers to this question

Recommended Posts

  • 0
hitthebricks Experienced

hitthebricks

Posted
Posted

That place is a walk in place. I don't recall the name but I brought mine in last year and they bench tested it and made the repairs while I waited. The place was kind of hard to find because its located in a new buisness park area. GL HTB

Link to comment
Share on other sites
  • 0
Gissert Veteran

Gissert

Posted
Posted

Indeed, bring it to the Vexilar headquarters, you will not be disappointed. I had a unit with a cracked face plate (from my abuse) and they fixed it while I waited, and even threw a hat and some stickers my way.

On another occasion, I had a transducer I suspected was going bad. They tested it on the spot, and gave me a new one, no charge.

Link to comment
Share on other sites
  • 0
Deepinthewoods Apprentice

Deepinthewoods

Posted
  • Author
Posted

Went to Vexilar and couldn't be happier.

Walked right in, the guy tried a repair so it would save me some $$$. No go, so I purchased a new transducer/cable. Was out of there in no time.

FYI, about 4 years ago they moved from 88th St in Bloomington to their current location on Old Shakopee Road. Much easier to find (not that I looked up the address on the Internet and went to the old location first).

Link to comment
Share on other sites
  • 0
icehousebob Mentor

icehousebob

Posted
Posted

Every winter, my kinfolk in So. Dak. do horrible things to their Vex's and send them with me to take to the Vexilar service center. I've had total rebuilds for the price of parts. They put a new motor on one that was worn out and several years old for no cost. They reconditionned one that hadn't filed a flight plan when it flew out of the back of the truck. Cleaned and freshed out one that had been stored in a snowbank in the back of a truck. We've also bought a few factory reconditioned ones there at a good price. All the repairs were done while I waited so a second trip wasn't needed. Great people and service... ( the girls behind the counter love chocolate donuts. I've gotten several free hats. laugh.gif)

Link to comment
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to question listing


  • Your Responses - Share & Have Fun :)

    • rundrave
      Problems with Yetti

      By rundrave · Posted

      we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • Wanderer
      Problems with Yetti

      By Wanderer · Posted

      I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • rundrave
      Problems with Yetti

      By rundrave · Posted

      reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
    • smurfy
      Just Food and Drink

      By smurfy · Posted

      Chef boyardee pizza from the box!
    • smurfy
      Just Food and Drink

      By smurfy · Posted

      Enchiladas 
    • smurfy
      Just Food and Drink

      By smurfy · Posted

      Venny neck roast!
    • Wanderer
      Merry Christmas

      By Wanderer · Posted

      Or he could go with leech~~~~~
    • Big Dave2
      Merry Christmas

      By Big Dave2 · Posted

      Bear can relate too. Tell Leech to start a new account named Leech5, we'll know who he is.If he has any trouble, Bear can walk him through it.
    • hugonian1
      Merry Christmas

      By hugonian1 · Posted

      Blessed Christmas to all.  
    • SledNeck
      Merry Christmas

      By SledNeck · Posted

      Merry Christmas 

  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

  I accept