Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

New at Walleyed Fishing


Recommended Posts

Rinkrat, Riggin' and Jiggin' probably account for the most walleyes over the course of the season. But if I had to pick one method from now until freeze-up to put a walleye in the boat, it would have to be trollin' minnowbaits after dark. Find a good walleye lake, troll the edges of large flats, humps, points, etc. and you should get bit. Oh ya, make sure you are familiar with the lake before you fish it after dark. Good Luck!

Link to comment
Share on other sites

Hi RinkRat,

Sorry about my above deleted post, I chose to ignore some of the forum rules and thus my post post went away. No one to blame but myself. blush.gif

IMHO, nothing is more rude than when you ask for assistance and someone flames you or makes derogatory remarks. I want you to know that the content in my post was a sincere attempt at giving positive advise. It was not derogatory in any form or manner, I just broke a forum rule or two and apologize for my actions.

Rod

Link to comment
Share on other sites

Easy... Talk to someone who knows a lake and ask what depth the fish are in.. For Lakes: Get a slip-bobber to go to that depth, slightly above bottom. Put on a small hook with a 3" minnow and a split shot 3' above the hook. Find a good point/ drop-off / weed-edge (weed edges at 10-16ft deep are my favorite as you will get crappie, bass, walleye, pike, etc...). Doesn't get much easier. Although, trolling diving crankbaits on a 8-16 ft flat, on the edge where it drops into deeeper water is also great option. If you know the walleyes are right below you, and they are 16'+ deep, use a leadhead jig with a minnow or leech and vertical jig (stay quiet as they will spook easily.... On a river the area just below a dam in fall -early spring is a great place to jig with minnows, and flats, or wing dams within 5-10 miles of the dam are great to troll cranks during summer. TIP: watch for other boats catching fish and mimic them!!! If you are jigging or slip-bobbering use light invisible line... with cranks, line invisibility is not as much of a concern. In clear water use lifelike colors, in muddy or darker water use chartruce or pink.

Link to comment
Share on other sites

Rink Rat,

Although the question is broad, I think a few things can be mentioned from the start to get you headed in the right direction. Spending time at the local bait shop can be effective as can hanging out at an area lake that is kicking out a few fish. Many conversations have been struck up at the landing after a day on the water. Also, not because I am one myself, but hiring a guide can dramatically shorten the learning curve. Good luck and I hope you start catching 'eyes real soon. The best time of the year is right around the corner. grin.gif

Link to comment
Share on other sites

I see you are from Mora so your only about a 1/2 hour from the south end of Mille Lacs. Here in a couple weeks, if some walleyes arent there already, a pile of them will start making that move back toward shore areas. You could very easily not just catch a walleye, but a pile walleyes out by heading out too a few rock piles in the evenings and fishing the slip bobber rig mentioned above. The nice thing being so close like you are is you can pick a day thats not too windy if you dont have a huge boat. And you dont have too go out from shore very far at all either. If you feel comfortable night fishing you can also troll cranks over these rocks.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • got this tackled today took about 3 hours to get both sides done. Didnt even get to use a torch....   Thought I was golden with just jacking it up and I could get to everything but no luck. Had to remove the entire axle hub and brake assembly to get to what I needed. Was a pain but still better then taking off the entire pivot arm.    Axle bearings were already greased and in great shape thankfully. Got both leaf springs installed and its ready for the road again.   Probably going to have my electric brakes checked, I am not touching anything with the brake drums. Based on what I saw it doesn't look like my electric brakes have been working anyway. Brakes are nice to have if its slippery out
    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.