Melon Posted April 15, 2006 Share Posted April 15, 2006 I feel dumb for asking this but I am having a hard time locating the oil drain plug. I know this might be difficult to answer but if someone could best describe the location of this thing I would be very thankful. I've looked everywhere and am stumped. My manual obviously is pointing me in the wrong direction. Thanks oh knowledgable 4X4 guru's!! Link to comment Share on other sites More sharing options...
Neiko Posted April 15, 2006 Share Posted April 15, 2006 If it is a 2 stroke there is no oil drain like a car. It is oil injected which means it adds a certain amount of oil directly to the cylinder with the gas. All you have to do is make sure the oil is full. There should be a cover on the front of the wheeler below the headlight that will say oil. Hope this helps. Link to comment Share on other sites More sharing options...
Melon Posted April 15, 2006 Author Share Posted April 15, 2006 Thanks Neiko, I think that's it. I was assuming I had a 4 stroke! Link to comment Share on other sites More sharing options...
Neiko Posted April 15, 2006 Share Posted April 15, 2006 No problem. Glad I could help. Link to comment Share on other sites More sharing options...
lgs Posted April 15, 2006 Share Posted April 15, 2006 Melon like Neiko said you don't have crank case oil in this two stroke. But you do have a crank balancer that has oil in it that should be changed.You will have to take the skid plate off to get to the drain plug that is by the starter. The fill- check plug is by the recoil.Only holds about 4 ounces. Link to comment Share on other sites More sharing options...
Recommended Posts