- 0
-
Your Responses - Share & Have Fun :)
-
By Down2Earth · Posted
I second the ulterra. Nice choice with the Yamaha this time around. -
-
Sorry to hear that Duff. Will give my GSP's an extra scratch behind the ear for you guys today -
Aw, man, sorry to hear that. Shed some tears and remember her well. They all take a piece of our hearts with them; some more than others. -
-
Truly sorry to hear that duffman! I know that feeling. Keep the good memories
-
Chamois passed away this weekend a couple days short of her 13th bday. What a great dog to hang out with here at home and on distant adventures. Gonna miss ya big time my little big girl. -
By Crow Hunter · Posted
Sounds pretty sweet, alright. I will check them out, thanks. -
If you really want to treat your wife (and yourself) with a remote operated trolling motor, the Minn Kota Ulterra is about easy as it gets. Auto stow and deploy is pretty awesome. You just have to turn the motor on when you go out and that the last time you have to touch it. 24V 80lb. 60 inch shaft is probably the right length for your boat. They ain’t cheap - about $3k - but neither one of you would have to leave your seat to use it all day.
-
By Crow Hunter · Posted
Wanderer, thanks for your reply. I do intend for it to be 24 volt, with a thrust of 70-80. Spot lock is a must (my wife is looking forward to not being the anchor person any more). With my old boat we did quite a lot of pulling shad raps and hot n tots, using the trolling motor. Unlikely that we will fish in whitecaps, did plenty of that when I was younger. I also need a wireless remote, not going back to a foot pedal. We do a fair amount of bobber fishing. I don't think I will bother with a depth finder on the trolling motor. I am leaning toward moving my Garmin depth finder from my old boat to the new one, just because I am so used to it and it works well for me. I am 70 years old and kinda set in my ways...
-
-
Topics
-
Question
hondavxr
My auger started this season running great, but after a trip to the URL, it started to act up. The auger string does not recoil all the way now, there’s about 3 inches hanging loose, and when I start the auger it can't not idle. I have to mess with the idle screw a bit for it to run. I think its messed up because I had a group of people go to URL and they don't treat my auger like how I would treat it. My question now is, do you guys have any shops you guys recommend to take this auger in for repairs? Thanks for the replies in advance.
Link to comment
Share on other sites
2 answers to this question
Recommended Posts