minneman Posted February 5, 2004 Share Posted February 5, 2004 I have 0 expieriance with these. I am wondering, is there a unit that will power a elec drill (Millwaukee hole hawg) that draws 7 amps?Im thinking that if it worked and I made up an adapter for an auger that it would be a sweet in the house auger...? your thoughts? Link to comment Share on other sites More sharing options...
0 iffwalleyes Posted February 5, 2004 Share Posted February 5, 2004 If it will work you are going to need the biggest invert just about that you can find. ------------------Grip it and Rip itIFFWalleyesI Fish For Walleyes[email protected] Link to comment Share on other sites More sharing options...
0 Dennis Steele Posted February 5, 2004 Share Posted February 5, 2004 I can power my 3/8 drill with my 400watt inverter,but you have to drill slow and not put too much load on the bit or it will pop the breaker.Go with a 750 watt and you will have no problems.Wish I would have. Link to comment Share on other sites More sharing options...
0 kwkfsh Posted February 5, 2004 Share Posted February 5, 2004 Amps(7)X Volts(120)=Watts(840) 1000 Watt inverter and you are set! Link to comment Share on other sites More sharing options...
0 Guest Posted February 6, 2004 Share Posted February 6, 2004 i've have a 1200w/2400w peak for 30 sec. in my work van and run my hawg, microwave and just about anything else as long as you leave the rig running and it's on it's 6th year, sweeeet Link to comment Share on other sites More sharing options...
0 minneman Posted February 6, 2004 Author Share Posted February 6, 2004 Thank you!! Link to comment Share on other sites More sharing options...
0 Fishing Junky Posted February 8, 2004 Share Posted February 8, 2004 How about using a small portable generator made by honda or yamaha? Could also use it to power lights and an electric heater in the fishhouse. Junky...........------------------A fishing guide is just a fishing junky who takes others with him to support his habit. Link to comment Share on other sites More sharing options...
Question
minneman
I have 0 expieriance with these. I am wondering, is there a unit that will power a elec drill (Millwaukee hole hawg) that draws 7 amps?
Im thinking that if it worked and I made up an adapter for an auger that it would be a sweet in the house auger...? your thoughts?
Link to comment
Share on other sites
6 answers to this question
Recommended Posts