I currently have the LMS-320 and X-91 depthfinders and I am looking to purchase the Navionics chip for the 320. What I am considering to do is use the LMS-320 with the chip full screen and use the X-91 as my depthfinder. My question is can a person modify the existing cable with a splitter of some type? My goal is to run both at the same time off the same transducer and power.
Wasn't terrible at a state park beach. Antelope island maybe. I wouldn't recommend it as a beach destination tho. Figured I was there, I'm getting in it.
The water looked and smelled disgusting with hundreds of thousands of birds sh*tting in there. About as gross as the Salton Sea. When I duck hunted there I didn't even want to touch the water.
It's kinda gross with the algae in the summer but I got in it anyway. Wanted to see the increased bouyancy at work. You can kinda tuck yourself into a ball and you'll just float with your head above water. When dry off you look diamond encrusted with the salt.
We went to the flats too. I dipped a tire on the rental car onto it just to say I’ve been there,but it was still pretty soft from winter melt. After seeing some moron in a BMW suv get dragged out of the muck I had no intention of repeating his stupidity.
Question
Dr. Juice
I currently have the LMS-320 and X-91 depthfinders and I am looking to purchase the Navionics chip for the 320. What I am considering to do is use the LMS-320 with the chip full screen and use the X-91 as my depthfinder. My question is can a person modify the existing cable with a splitter of some type? My goal is to run both at the same time off the same transducer and power.
Link to comment
Share on other sites
7 answers to this question
Recommended Posts