rodbuilder Posted March 30, 2005 Share Posted March 30, 2005 Hi All, I have a Pro-V and want to install a taller, stand-up butt seat type of pedestal on the bow. Will the swivl-eze wedge swap directly into this or do I need to replace the base as well?Thanks! Link to comment Share on other sites More sharing options...
0 Deitz Dittrich Posted March 30, 2005 Share Posted March 30, 2005 No expert on this for sure.. but I would think you would just have to replace the seat.. Just make sure that if you are buying a new pole that is longer that you buy one that works with the base you already have in your boat. Link to comment Share on other sites More sharing options...
0 rodbuilder Posted March 30, 2005 Author Share Posted March 30, 2005 That's my question, will the swivl-eze wedge pole/pedestal work with the factory Lund base??? Link to comment Share on other sites More sharing options...
0 Sgt. Rock Posted March 31, 2005 Share Posted March 31, 2005 As far as I know the SwivelEze and the Springfield wedge bases are the same. Works on mine. Link to comment Share on other sites More sharing options...
0 SteveWilson Posted March 31, 2005 Share Posted March 31, 2005 No, the Lund base isn't a wedge. You want the plug-in pedestal Link to comment Share on other sites More sharing options...
0 marine_man Posted March 31, 2005 Share Posted March 31, 2005 It all depends on what year your lund is.. up until about 3 years ago (or so) lund used the wedge lock 100%... (which is what I presume the original poster asked about).They now have the plug style which just slips over the top of the base.marine_man Link to comment Share on other sites More sharing options...
0 rodbuilder Posted April 4, 2005 Author Share Posted April 4, 2005 Thanks all. It is a 93 Pro-V so it looks like the swivl0eze wedge should work. Thanks again...COMEON OPEN WATER!!!! Link to comment Share on other sites More sharing options...
Question
rodbuilder
Hi All, I have a Pro-V and want to install a taller, stand-up butt seat type of pedestal on the bow. Will the swivl-eze wedge swap directly into this or do I need to replace the base as well?
Thanks!
Link to comment
Share on other sites
6 answers to this question
Recommended Posts