I have a 107 pound 36 volt motorguide bow mount and was hoping that somebody can help me on this one. Because this is a cable steer unit, it is not possible to point it in one direction and take your foot off the pedal. I bought this unit used and am not too familiar with motorguide. It seems to me that there should be a way to tighten the resistance on the shaft so that it will stay pointed where you want it.
Does anyone know if this is possible.....?? If so, then how??
Wasn't terrible at a state park beach. Antelope island maybe. I wouldn't recommend it as a beach destination tho. Figured I was there, I'm getting in it.
The water looked and smelled disgusting with hundreds of thousands of birds sh*tting in there. About as gross as the Salton Sea. When I duck hunted there I didn't even want to touch the water.
It's kinda gross with the algae in the summer but I got in it anyway. Wanted to see the increased bouyancy at work. You can kinda tuck yourself into a ball and you'll just float with your head above water. When dry off you look diamond encrusted with the salt.
We went to the flats too. I dipped a tire on the rental car onto it just to say I’ve been there,but it was still pretty soft from winter melt. After seeing some moron in a BMW suv get dragged out of the muck I had no intention of repeating his stupidity.
Question
wastewaterguru
I have a 107 pound 36 volt motorguide bow mount and was hoping that somebody can help me on this one. Because this is a cable steer unit, it is not possible to point it in one direction and take your foot off the pedal. I bought this unit used and am not too familiar with motorguide. It seems to me that there should be a way to tighten the resistance on the shaft so that it will stay pointed where you want it.
Does anyone know if this is possible.....?? If so, then how??
Thanks,
Link to comment
Share on other sites
2 answers to this question
Recommended Posts