Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

A good four person tent?


Navigator

Recommended Posts

I'm looking for any input on a good four person tent. I need one that you can stand up in and is waterproof. Light weight is not important since I will be packing it around in a boat.

I've looked at the ones in Cabela's catalog and they have a 10' x 16' (plenty of room for 4 cots) for approx $200 that looks good. I'm in un-charted territory so any help is appreciated. smile.gif Nav

Link to comment
Share on other sites

I can tell you one tent not to buy. I bought a 3 room tent. One room was just a screen room. Good for eating meals in on heavy misquito days. However, the screen section did not have any rain flaps to close shut. When it rained that section got an inch of rain in it. On one trip I brought 1 tarp and it rained 4 days and 4 nights solid. Had to bail the screen room every couple of hours. The other 2 bedrooms stayed dry. I had to use the tarp over the camp fire and I had a table and chairs set up under it too and fire wood. We kept the fire going and cooked and ate under the tarp, so the screen section that I could not cover just kept getting rain in. I now have a different tent. I don't like it either but its better then the previous one. - northman

Link to comment
Share on other sites

We picked up a six person tent from Gander mountain this fall and coulddn't be happier with it. It sets up easy and folds into a small pack on wheels. Usedin a down pour and didn't have a drop of water in it evn with the vent flaps open. I don't remember the name but it was the store brand.

Link to comment
Share on other sites

Last year I bought the Cabelas XWT (Extreme Weather Tent) 12x12. It's not cheap ($599) but worth the $. Can be used with or without the rainfly as both tent and rainfly are water resistant. About 6'8" center and plenty of room for 4 with gear. With rainfly on it has plenty of dry storage space in the vestibule. I went through a couple of other cheaper tents in the past and got what I paid for. "short term life." Cabelas has a computer demo on this tent at their HSOforum. Another good one would be the Cabelas Alaskan guide tent.

Link to comment
Share on other sites

Fishing Junkie - A few practice runs setting up this tent are neccessary. The first time it took two of use about 45 minutes. A second setup took about 30. After that, no more than 15 minutes. It's just a matter of remembering the steps without having to go back to the instructions. I've set it up alone in about 20 minutes but 2 adults are best. I used it last fall and packed out on a morning when there was a heavy frost. After the rainfly came off the tent was completely dry and didn't need re-setting at home. I love the thing. It is a rock solid tent.

Link to comment
Share on other sites

Kelty makes a family sized tent called the Mantra. It comes in a 7 person that would accommodate four cots nicely and it built to stand some tough weather. It also has a vestibule to store gear outside of the body but with in the rain-fly.

The reason I posted this message is because I have been seeing them on sale and clearance at Gander and other retailers.

Normally it's a $400 tent but I have seen it at nearly half that price. And it's a killer tent too.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.