Got a new Ulterra with I-link. There is a direction sensor that needs to be mounted and powered. Says not to mount too close to other wires, batteries, electronics or ferrous metals. My boat is 1800 Lund Tyee. Does this thing need to be out in the open or can you mount out of site? Directions do not state anything about this. Anyone else deal with this or have a good spot for it?
You can post now ↓↓↓ or ask your question and then register.
If you have an account, sign in nowto post with your account.
Note: Your post will require moderator approval before it will be visible.
Wasn't terrible at a state park beach. Antelope island maybe. I wouldn't recommend it as a beach destination tho. Figured I was there, I'm getting in it.
The water looked and smelled disgusting with hundreds of thousands of birds sh*tting in there. About as gross as the Salton Sea. When I duck hunted there I didn't even want to touch the water.
It's kinda gross with the algae in the summer but I got in it anyway. Wanted to see the increased bouyancy at work. You can kinda tuck yourself into a ball and you'll just float with your head above water. When dry off you look diamond encrusted with the salt.
We went to the flats too. I dipped a tire on the rental car onto it just to say I’ve been there,but it was still pretty soft from winter melt. After seeing some moron in a BMW suv get dragged out of the muck I had no intention of repeating his stupidity.
Question
slammer
Got a new Ulterra with I-link. There is a direction sensor that needs to be mounted and powered. Says not to mount too close to other wires, batteries, electronics or ferrous metals. My boat is 1800 Lund Tyee. Does this thing need to be out in the open or can you mount out of site? Directions do not state anything about this. Anyone else deal with this or have a good spot for it?
Link to comment
Share on other sites
5 answers to this question
Recommended Posts
Join the conversation
You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.