Fish house door

[bken]

I was wondering how you guys do your doors? I have a fiberglass door with a full aluminum frame. If i put on the plywood floor I have a 1 inch lip on the floor. i have a rubber floor. Any suggestion how to eliminate the 1 inch lip?

[Moon Lake Refuge]

We have the lip too and are going to have a piece of diamond plate bent to create a small ramp.  Not ideal but looks more fluid.

 

[bken]

Yeah I was thinking of doing something like that too.

[papadarv]

You can buy or make a Door threshold ramp. I made mine out of a piece of 1.5" x 6" oak. Used a table saw to cut the angle and belt sander to match to the door lip.

https://www.google.com/?gws_rd=ssl#q=door+threshold+ramp&*

[bken]

i was looking into those too.

[Lip_Ripper Guy]

I think I had a about a 2" lip.  I took (2) 1x2's the width of the door and nailed them together, and routered a 45 on the one side, basically making one of those threshold ramps above.  Also routered a groove underneath to hide my propane line.    

[bken]

thanks for the replies