I pilot no signal

[esoxhunter11]

I have the I pilot on my 55lb powerdrive. Never had an issue.

Now I have no signal no navigation or anchor mode does not work.

It is a 12 volt system. I replaced both batteries still no signal. I also replaced remote battery still nothing. Batteries are fully charged. All cable lines look good. Tried relearning remote. I get 4 beeps. Still nothing. All other features beside gps work. It worked fine last fall.

Any one else run into this problem

I think I will need to replace the head unit or controller. I hope I am wrong.

I need some solutions, I have a tourney in 2 days.

Thanks Will

[delcecchi]

So there are no bars for GPS signal on the ipilot?

Just to eliminate something, not trying to insult you, but the unit is outside with a clear view of the sky, right? Not in the garage with a foil vapor barrier. Or a steel shed...

[Hoey]

Esox,

I had my I-Pilot fail and was able to get a replacement under warranty, so they do fail. Another note, have you tried to re-sync the remote with the motor?

[esoxhunter11]

I did but no change. I did get 4 beeps this time and I thought I got 3 beeps the previous times.

[fishyspringer]

I also had this problem on a brand new terrova last summer on my new boat. Brought it in to a minnkota service center and they replaced the gps receiver in the head.