bASS_BLASTER Posted February 18, 2015 Share Posted February 18, 2015 I have the plastic one, it works but hard to access and a hassle to take out the tanks to refill. I'm looking for a custom diamond plate box. I've searched and can't find any. Anyone know where I can get one for 2, 30# tanks? Quote Link to comment Share on other sites More sharing options...
BLACKJACK Posted February 19, 2015 Share Posted February 19, 2015 I have the plastic one that covers my two thirty pound tanks, I used to think the same think, hard to get off, but last time I swapped out and filled a tank, when I put the tank back on I adjusted it in a little, the tanks are a tad closer together, the cover now fits looser, comes right off. I pulled it off the other night to check the fill level in my tanks, it was -2 out and it slid right off. Almost worried about it coming off down the road... Quote Link to comment Share on other sites More sharing options...
bASS_BLASTER Posted February 19, 2015 Author Share Posted February 19, 2015 My last house had one and I loved it. It was a simple open, switch lever/tank and close. Also had a pad lock too. My fingers don't work well in minus temps + wind chills and keeping track of the little screw knobs is a challenge. Hmm? Someone has to know a person who make/sell these. Quote Link to comment Share on other sites More sharing options...
Hawg Posted February 19, 2015 Share Posted February 19, 2015 What do you think it would cost to build? My guess for 1/16 plate alone would be about $100 - $150 wouldn't it? Quote Link to comment Share on other sites More sharing options...
bASS_BLASTER Posted February 19, 2015 Author Share Posted February 19, 2015 The price is not for everyone. I can't imagine it being more than $300. Thought I throw my business here but so far no leads. I might just contact a welder. Quote Link to comment Share on other sites More sharing options...
Hawg Posted February 19, 2015 Share Posted February 19, 2015 I've been curious too because I have 2-40#'rs that nobody makes even a rigid plastic cover for so improvising/designing is in my future also. A sheet metal or floor tread box with POR 15 might be an option also, and avoids the headache of maintaining the diamond plate. Quote Link to comment Share on other sites More sharing options...
bASS_BLASTER Posted February 19, 2015 Author Share Posted February 19, 2015 I have a welder I worked in the past. He does a great job. He mainly works on boats but I'm sure he can come up with something. I'll keep you posted Hawg. Quote Link to comment Share on other sites More sharing options...
Hawg Posted February 19, 2015 Share Posted February 19, 2015 Thanks. I was just wondering what applications there are for steel boxes that might work. It seems the State has some pretty elaborate covers on things now days, or electricians. Railroad shop? Lockers? Paint cabinet? Quote Link to comment Share on other sites More sharing options...
Dozer Posted February 21, 2015 Share Posted February 21, 2015 Firebrand houses have one, maybe they will sell you one. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.