Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Propane prices at Red Lake?


Hawg

Recommended Posts

Heading up this weekend with one full and one partial 40# tank. I think I'm ok but I'm too lazy to take it off and weigh it. With the security chain, cover, dual regulator and such it's a pretty P I A job. Are prices up there ok or am I going to regret not taking care of it at home?

Link to comment
Share on other sites

Heading up this weekend with one full and one partial 40# tank. I think I'm ok but I'm too lazy to take it off and weigh it. With the security chain, cover, dual regulator and such it's a pretty P I A job. Are prices up there ok or am I going to regret not taking care of it at home?

Don't know the prices, but do know that if you think it's a P I A now, it will likely be worse when you run out of propane at 2am and it's sub-zero and no one on/around Red Lake is open 24 hours to fill it... In other words, your P I A now will be piece of mind later. 2c

Link to comment
Share on other sites

I was on Rog ers Porta Villa and I believe a 30#er was like $25. It also said prices can change but that if I am correct is fairly reasonable.

40 is $35 these prices plus tax.

I also am leaving in the am and have no idea what I have for propane but I do have one full 303er for sure so that along should be good, if not, well I will find out how much the other one has while they fill one.

Link to comment
Share on other sites

Harvey Lee, That's about the same as here and supporting the locals is important to me, that's why I spend so much time at as many bars as I can. wink Pikestabber, with dual tanks you're pretty safe at 3am.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • got this tackled today took about 3 hours to get both sides done. Didnt even get to use a torch....   Thought I was golden with just jacking it up and I could get to everything but no luck. Had to remove the entire axle hub and brake assembly to get to what I needed. Was a pain but still better then taking off the entire pivot arm.    Axle bearings were already greased and in great shape thankfully. Got both leaf springs installed and its ready for the road again.   Probably going to have my electric brakes checked, I am not touching anything with the brake drums. Based on what I saw it doesn't look like my electric brakes have been working anyway. Brakes are nice to have if its slippery out
    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.