Hawg Posted January 5, 2014 Share Posted January 5, 2014 I've been using these for 5-6 years but always build them with a primer bulb and clear gas line to be sure they are working. With a Honda and a fuel pump like they have, is a simple piece of black fuel line between the tank and generator the way to go? The clear stuff always gets very stiff in the cold. Quote Link to comment Share on other sites More sharing options...
Minnie_sota_Mike Posted January 5, 2014 Share Posted January 5, 2014 I use the standard black fuel line with no issues, the key to any of the extended run set-ups is no air leaks in any of the connections Quote Link to comment Share on other sites More sharing options...
Hawg Posted January 5, 2014 Author Share Posted January 5, 2014 Mine always works but there are a lot of potential air leaks with that clear line and a bulb. You're black gas line only then? I'm going to do it that way, it has suction so the bulb is definitely not needed. Quote Link to comment Share on other sites More sharing options...
JSK76 Posted January 5, 2014 Share Posted January 5, 2014 I wasn't aware the Honda had a fuel pump, since the tank sits on top I thought it was gravity feed. Your talking about the little portable red ones right? Quote Link to comment Share on other sites More sharing options...
Hawg Posted January 5, 2014 Author Share Posted January 5, 2014 I'm not 100% sure it does but about 80% sure. That's why a tank can sit next to a Honda but has to be higher than a Yamaha isn't it? Quote Link to comment Share on other sites More sharing options...
low277 Posted January 6, 2014 Share Posted January 6, 2014 Does anyone have a picture of one that they have made? Quote Link to comment Share on other sites More sharing options...
thefarmer Posted January 6, 2014 Share Posted January 6, 2014 They sell the caps on amazon. I bought the same quick attach end that is on my mercury kicker motor and it threaded right in to the cap. Now i just use my auxiliary gas tank from my boat on the generator. Quote Link to comment Share on other sites More sharing options...
low277 Posted January 6, 2014 Share Posted January 6, 2014 Great! thanks! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.