Hole Hog Posted November 16, 2013 Share Posted November 16, 2013 Kinda. The frame is from miltona blacksmith. 6'4" by 12' with 3' v-front 15' total length. $1200 rhino line painted frame 3/4 green treat floor. Approx.$120 floor over hangs 1" all the way around. Quote Link to comment Share on other sites More sharing options...
merkman Posted November 16, 2013 Share Posted November 16, 2013 Good choice on the Miltona trailer.... i have had mine for 4 years and I absolutely love mit. Ulls great backs even better... never a problem with it. Needs paint now.. I like the idea of rhino lining it.-Merk. Quote Link to comment Share on other sites More sharing options...
Hole Hog Posted November 16, 2013 Author Share Posted November 16, 2013 Floor is glued screwed and bolted. Get windows and door before the start of framing.frame is 2x3 and 2x4 also glued (pl premium) screwed and bolted around the edges.33 total 2x3 $69.30- 14 2x4 = $36.68. 3 windows $20.00per. 1 door $100. I got the door and windows at a Rv.salvage yard in Wisconsin.its You rip out what you want.frame walls 16" on center. 2x4 for roofing toped with 1/2 plywood $71.80 for 4 sheets.make sure you make your pile to the side when digging for your straight lumber at the big box store they love this.lol Quote Link to comment Share on other sites More sharing options...
Hole Hog Posted November 16, 2013 Author Share Posted November 16, 2013 Aluminum siding .o40 10 sheets at $48.00 per. Sheet. Garelick steel. Ask for Dan.screwed and glued no tape for me, lil ripper guy.lay your sheets over your window slots then cut out later. Quote Link to comment Share on other sites More sharing options...
randerson Posted November 17, 2013 Share Posted November 17, 2013 why did you overlap the frame 1"? Quote Link to comment Share on other sites More sharing options...
Hole Hog Posted November 17, 2013 Author Share Posted November 17, 2013 If this was 8' wide I would not have done the 1" over hang. But since this one started at 6"4' wide, every inch you can save or gain for your finished interior is nice.figure you start at 6'4" wide, add your 2x3 studs (each side) that's 6" you lost in your width right there. Now factor in what you use to finish your interior with. Yea I know its not much to gain,but I read on here that someone else did this so I thought I'd try it. Quote Link to comment Share on other sites More sharing options...
leech~~ Posted November 17, 2013 Share Posted November 17, 2013 Where did you get the $20 buck windows and is there any left? Quote Link to comment Share on other sites More sharing options...
Hole Hog Posted November 17, 2013 Author Share Posted November 17, 2013 He is located in chetek wisconsin just south of rice lake.its been a few months since I have been there, but he has about 30 rv's on his lot to be salvaged. He would have plenty of windows/shape/ sizes left. $20 doesn't matter whitch window you choose.you just need to pull them out.all the good doors are picked through I thought.can't find his # right now. I'll post it if I find. Hope this helps Quote Link to comment Share on other sites More sharing options...
leech~~ Posted November 17, 2013 Share Posted November 17, 2013 He is located in chetek wisconsin just south of rice lake.its been a few months since I have been there, but he has about 30 rv's on his lot to be salvaged. He would have plenty of windows/shape/ sizes left. $20 doesn't matter whitch window you choose.you just need to pull them out.all the good doors are picked through I thought.can't find his # right now. I'll post it if I find. Hope this helps Oh poo! The gas just getting there would bring the price up on them a bit. Thanks. I have until next fall anyway when I start building something. Quote Link to comment Share on other sites More sharing options...
Hole Hog Posted November 18, 2013 Author Share Posted November 18, 2013 Getting ready to put trailer lights in. Any pointers of how to run the wires from the inside to plug into the vehicle? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.