walleye- Posted September 24, 2013 Share Posted September 24, 2013 Wondering if anyone has a idea why my rpms have starting going the wrong way. At idle they are running around 2300 and when I hit the throttle they go down? Now they were reading about 800 at idle when everything was working. I did replace it about 6 months ago with a aftermarket one. Also if I wiggle the wiring it goes down but then goes right back to 2300 or so at idle. Thinking its the wiring just really confused why it would be working backwards. Anyone have this happen before or have an idea. Also I checked the charging and that's workin. Thanks Quote Link to comment Share on other sites More sharing options...
walleye- Posted September 29, 2013 Author Share Posted September 29, 2013 Figured it out I pulled the flywheel to take a look and the wire harness had moved and started rubbing against the flywheel which wore threw. Spliced the wires and all is good again. Quote Link to comment Share on other sites More sharing options...
Dave S Posted October 1, 2013 Share Posted October 1, 2013 Thanks for the reply back walleye. Good to hear you got it figured out. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.