Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Jigging Deep


MNMUSKIE50

Recommended Posts

I WISH I would have had a big jigging spoon or a bondy some years ago.. whitefish were staging to spawn on a lake in Canada at the bottom of an 80 ft deep bay and we were marking large fish 40 feet down.

I have vertical jigged for muskies and pike since, but without success. Basically I've used large jigging spoons meant for fishing in the salt water and jigged them while drifting.

Link to comment
Share on other sites

drop down to the bottom, Put your rod tip at waters level and rip upward only as far as your waste line so you still have room to set the hook, the let fall on tight line. Key is to never let your line go slack and down high-stick each rip of the lure.

Link to comment
Share on other sites

Hiya -

I've done it with some success over the years...

Good electronics are really a key to me. I mark a lot of the fish I catch doing it, and sometimes what you really end up doing is driving around looking for fish along steep main lake basin breaks then dropping on them when you see one. Jig for a few minutes and they either bite or they don't.

About the only bait I ever use jigging deep is a Shumway Fuzzy Duzzit. It's basically a giant blade bait, and it just plain works. I've never done well on the Bondy bait, although I know some that have. The only other bait I've had some success on is a big Red October tube.

RawHog described the technique very well. It's just a steady lift/drop. Not really a rip, but just a steady, firm lift so you can feel the Duzzit thumping. Then follow it down on a tight or nearly tight line. Hits usually come on the drop and can be amazingly subtle. The fish is just there when you go to lift again sometimes. (There are exceptions. I filmed a TV show with The Next Bite deep jigging muskies several years ago, and had a fish smoke it half way up on a lift and just about take the rod out of my hands...)

This is a great technique to combine with heavily-weighted suckers fished vertically too. Sometimes the jig seems to call fish in to the suckers and the meat gets all the bites. Other times, they ignore the suckers and grab Fuzzy. Depends on the day...

As to where - main lake points, the edges of humps, and especially inside turns. Like I said, it involves a lot of looking with electronics (I actually had a guy fall asleep on me while I was graphing spots). Look especially at the steepest-breaking parts of a point or hump. Keep checking spots until you see 'life' on the screen - baitfish or big arcs.

One word of caution on how deep 'deep' is: Personally I won't fish deeper than about 25 feet. In my experience bringing fish up from deeper than that can cause barotrauma (swim bladders over expand and fish can't swim back down or stay upright, capillaries burst due to the pressure change, etc. ) that makes safe, live release very questionable.

I know people try 'fizzing' fish with a needle, but I talked about it once with a guy with a Ph. D. in fish physiology who has spent his career studying muskies, and he said even with his knowledge of their anatomy he wouldn't try it for fear of being 1/4" off and killing them. He said you might as well stick them with a filet knife because your odds of not killing them were about the same. That was enough for me. If they're deeper than 25' or so, leave them be...

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • 🤔as a recovering machinist!🤣🤣that must make me a recovering welder!
    • As a recovering machinist, I can appreciate that.  If the spec is 0.001 - 0.0015, then clearly the correct measurement is 0.00125, duh…
    • I just figured that it is easy enough to just get a 3 bank so when the boat is not in use I can keep all 3 batteries charged. I have not bough a charger yet, maybe I will give it some more thought. Edit: After thinking this over, with the size, weight, and heat output of the charger (as well as the cost) I think it makes sense to just buy a 2 bank charger, I have a smaller charger i can use on the starting battery when the boat is sitting at home. Forgive me, for i am a retired engineer and I have to obsess over everything...
    • Congrats on the motor!  I think you’ll like it.   I can’t say much on the charger location but I’ve seen them under the lid in back compartments and under center rod lockers.  160 degrees is more than I expected to hear.   Curious why you’re opting for a 3 bank charger with a 24V trolling motor.  Unless you don’t feel you be running you big motor enough to keep that battery up as well?
    • I did buy an Minnkota Ulterra, thanks for the recommendations. I had a bunch of Cabela"s bucks saved up, which helped. Now i need to get an onboard battery charger. Where do you guys mount these things in your boat? The manufacturer I am looking at {Noco genius) says tht their 3-bank charger will run at 160 degrees, seems like a lot of heat in an enclosed compartment? Thanks for any input on this.
    • You're very lucky a troop of Sea Monkey's didn't carry you away.   
    • Wasn't terrible at a state park beach. Antelope island maybe.  I wouldn't recommend it as a beach destination tho.  Figured I was there, I'm getting in it.
    • The water looked and smelled disgusting with hundreds of thousands of birds sh*tting in there.  About as gross as the Salton Sea. When I duck hunted there I didn't even want to touch the water.
    • It's kinda gross with the algae in the summer but I got in it anyway.  Wanted to see the increased bouyancy at work.  You can kinda tuck yourself into a ball and you'll just float with your head above water.  When dry off you look diamond encrusted with the salt.
    • We went to the flats too. I dipped a tire on the rental car onto it just to say I’ve been there,but it was still pretty soft from winter melt. After seeing some moron in a BMW suv get dragged out of the muck I had no intention of repeating his stupidity. 
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.