Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Panfish in the Pads


Bobb-o

Recommended Posts

PTDC0142.jpg

Wide swaths of lily-pads, as far as the eye can see. For a bass guy, this can pretty close to heaven come summer/early fall, but for panfisherman all it normally amounts to is a dense jungle offering nothing but the ability to steal every jig in your arsenal and leave you pouting and heading for deeper water. There are ways to fish the pads, and they hold some amazing bluegills and crappies, but it takes a little bit of patience, the ability to improvise, and being ok with catching a few bass along the way.

bob bohlandI discovered this tactic more by sheer annoyance and curiosity than anything else. I was walking a Pad-Crasher through a lily-pad bed one day and was being harassed by consistent little smacks and swipes at my bait. Having a few panfish rods in the boat from earlier in the day, I had to make my way in further to find out what found my topwater so interesting. Going further into the pads with a little help from a push-pole I was astounded at the size of some of the panfish that were darting around under these pads. I quickly dipped my smaller panfish offering into a pocket and pulled out a good bluegill right away, I was so excited and surprised at this find that I fished the presentation for the rest of the weekend with much luck, refining the tactic as I went.

First things first you are gonna need at least two rods in your boat, a good baitcaster rigged up with some super-heavy line and a topwater frog or mouse, and a long panfish rod, (a fly-rod makes a great stand-in if you don’t have a long pannie rod) the longer the better. I prefer at least 7 feet, but there are telescoping rods from a variety of companies that extend to twenty feet. The longer your rod the easier it is to place your bait exactly where you want it and extract the fish once you have it hooked. Cast your bass topwater out across the pads and take notice of any pops and swirls you have, because that is where you will find the biggest panfish as they are not shy about attacking something big. Then pole or use your bowmount to get close to that spot and drop your bait in front of them, it’s that easy!

Don’t be afraid to use oversized jigs though, these fish just attacked a bait that is at least twice the size of any topwater you just had them take a swipe at, so don’t be shy. The problem with small jigs in this situation is you will often have smaller panfish on the fringes of these larger fish that will quickly dart in and grab anything they can fit in their mouths. I like to use a 1/32 oz jig with a 1 ¾” or 2” Lindy Watsit Grub in bright colors like “Orange/Chartreuse” and “Pink/White”. These larger panfish will travel in groups of at least 3 or 4 fish so when you get one big fish, probe that entire area for a few minutes before you move on, but often you will get the largest fish in the group within the first one or two caught before the little ones move in to join the frenzy.

In clear water, lily-pads can grow in depths of 5-6 feet of water or even more. So there is a lot more water under those pads than you may think. A good pair of polarized sunglasses will go a long way towards being able to spot the fish you want to target, as they are not always directly under the pads. Practice makes perfect with this presentation and the more you do it, the easier it will be to identify the size of the fish hiding in the pads.

Link to comment
Share on other sites

Interesting idea. I cast a Scum Frog around our dock w/ pads at least once a weekend when we are north. Sometimes the bass are there, but more often than not I will get the panny trying to swipe it. Have to maybe think about a long telescoping rod.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • got this tackled today took about 3 hours to get both sides done. Didnt even get to use a torch....   Thought I was golden with just jacking it up and I could get to everything but no luck. Had to remove the entire axle hub and brake assembly to get to what I needed. Was a pain but still better then taking off the entire pivot arm.    Axle bearings were already greased and in great shape thankfully. Got both leaf springs installed and its ready for the road again.   Probably going to have my electric brakes checked, I am not touching anything with the brake drums. Based on what I saw it doesn't look like my electric brakes have been working anyway. Brakes are nice to have if its slippery out
    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.