Jump to content

  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Fish house door

forcedtowork

By forcedtowork
in Ice Fishing

 Share

Recommended Posts

forcedtowork Collaborator

forcedtowork

Posted
Posted

I am looking to get a fish house door for my project, I checked out fish house supply, but the freight is a killer and I can not get down to pick one up, I was looking at another RV salvage place in Fairmont, however I can not geta hold of them, any one have any experience with them? Send me a pm if you want, or help point me in the right direction.

Link to comment
Share on other sites
fins&feathers Apprentice

fins&feathers

Posted
Posted

focredtowork....i had the same problem with mywheel house 2 years ago when i built it all could afford was a interior door hoping that with plenty of paint it might work..needless to say it didnt so i talked to a gentlmen at menards and he said that he might be able to find someone that could custom build me a exterior door [my door is 24inches by 80inches]didnt hear from him for a week, but he got it done, placed my order last sat.its gonna take 3 weeks...i went to forest lake,mn menards, hope this might help, good luck

Link to comment
Share on other sites
Brad B Veteran

Brad B

Posted
Posted

Check with your local RV dealer and their parts/service department they might be able to help you. I don't know how may RV dealers are in the fargo area but the big one in my area is Pleasure land RV in St. cloud. the only problem is they are 3 hours from fargo. I just tought of another place that might be closer for you. call Zack Shacks out of Mandan, ND they build fish houses.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Your Responses - Share & Have Fun :)

    • Wanderer
      Problems with Yetti

      By Wanderer · Posted

      I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • rundrave
      Problems with Yetti

      By rundrave · Posted

      reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
    • smurfy
      Just Food and Drink

      By smurfy · Posted

      Chef boyardee pizza from the box!
    • smurfy
      Just Food and Drink

      By smurfy · Posted

      Enchiladas 
    • smurfy
      Just Food and Drink

      By smurfy · Posted

      Venny neck roast!
    • Wanderer
      Merry Christmas

      By Wanderer · Posted

      Or he could go with leech~~~~~
    • Big Dave2
      Merry Christmas

      By Big Dave2 · Posted

      Bear can relate too. Tell Leech to start a new account named Leech5, we'll know who he is.If he has any trouble, Bear can walk him through it.
    • hugonian1
      Merry Christmas

      By hugonian1 · Posted

      Blessed Christmas to all.  
    • SledNeck
      Merry Christmas

      By SledNeck · Posted

      Merry Christmas 
    • Mike89
      Merry Christmas

      By Mike89 · Posted

      Merry Christmas to all !!
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

  I accept