Oxygen gauge 4 torch kit

[opsirc]

any one know if , if one of the pressure dials on a oxygen gauge for a torch set can be replaced because the needle is struck on the 30 psi spot or if there is something wrong with the total gauge?

thanks

[Macgyver55]

Each of the gauges are replaceable separately. One is the tank pressure and the other is the regulated pressure. Have you backed off, or increased the regulated pressure to see if it moves? The regulated gauge should not move though unless you change the regulated pressure by turning the knob on the regulator. If it still doesnt move, sometimes if you give them a slight tap they will respond, but generally once they stick it should be replaced.

[LightningBG]

30 psi should be the regulated pressure gauge.

[LightningBG]

You should be able to buy the gauge you need (if its truly broken) for pretty cheap.

Try adjusting the pressure to see if it moves, if not, replace.

[c0untryf1sh3r]

Like Macgyver said, give it a couple taps and if it doesnt move the replace it. Dont forget the teflon tape if you end up having to replace the gauge.