Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Soft plastics for pike


Lunker

Recommended Posts

I fish pike a lot, but not much with soft plastic. I fish mainly with spinnerbaits and cranks. But I've heard a lot of success stories by using soft plastics and soft plastic tipped jig and pig type lures. Do any of you use these baits? If so, which ones? Would white be the best color?

Link to comment
Share on other sites

Hey Lunker,
Slugo's are stone killers in cold water
or after cold fronts when nothing else seems to work.
Some of my very favorite baits are 9" jerk worms, 6" grubs, 4" tubes and the 4" and 6" reapers, all of these should have a place in your pike arsenal. smile.gif

They can be rigged weightless, on a jig
worked like a hard jerkbait, or slowly bounced on the bottom.
Plastics, will go anywhere the fish are and can be rigged totally weedless and they are effective when other baits are
cold.

------------------

Terry "Ace" Sjoberg
Ace guide service.
aceguideservice.com
218-753-2612
[email protected]

Link to comment
Share on other sites

Hey Guideman,

I just picked up some 6 inch reapers recently (with Cobra jigs). I've heard lots of different ways to fish these, but what would you suggest? Can these be rigged weedless with the jig heads? Any help would be appreciated. Thanks.

Mark

Link to comment
Share on other sites

Wow!
Bang!
Wham!
Shad baits and Reapers Rock on the right structure and at the right speed or jerk!
1 1/4 oz J-Mac jigs are nice.
7/0 hook, plastci shirts, comes though weeds nice and bounce off rock.
Lots of Shads will work, Pogys work, Reapers and Twisters are KING.
Action Plastics makes one hell of a Power tail.
Most over looked bait.
4" Power Grub on a 1/2 oz Whistler jig.
Killer for all size pike.

KEEP ON ROCK"EN!


Musky Tom wehler

Mallard Island
Lake Vermilion
www.muskytomsguideservice.com

Link to comment
Share on other sites

Hey Mark,
There are an unlimited number of hooks that can be used for plastics. smile.gif

Weighted hooks can give you some great
action on all kinds of plastic baits.
Most good tackle stores, carry a good supply of hooks for rigging plasitcs.

The options are almost limitless if you
use your emagination. Weedless jigs are
another way to get into the thick stuff
and find fish.

------------------

Terry "Ace" Sjoberg
Ace guide service.
aceguideservice.com
218-753-2612
[email protected]

Link to comment
Share on other sites

Mark, good question. I'm gonna try the reapers this spring. They look like a good cold front presentation. If only I could figure out how to get some type of action out of them...

------------------
Later.

Link to comment
Share on other sites

Yes, I think that soft plastics and a jig will take more fish than any other lure, especially the big pigs. Not many people throw these lure when they fish for northerns. Most people like to stick with the spoons, spinners, and live bait. Another one that you might want to consider is a big pork jerkbait on the back of a jig. Uncle Josh has one called the "porker" and it is 7.5" long. And i have yet to see a fish that can rip up a piece of pork. Another thing I have been doing lately is buying big saltwater plastics. 9-10" range. I also thing that berkley makes something called a power pogie, which is a big chuck of plastic that resembles a huge minnow, and apparently the tail has awesome action. I also just picked up some 6" power grubs at a shop in st paul. I cant wait to use them. If you ask me the bigger the bait the better. It is only about a month now, and hopefully this year will be better than last year.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • got this tackled today took about 3 hours to get both sides done. Didnt even get to use a torch....   Thought I was golden with just jacking it up and I could get to everything but no luck. Had to remove the entire axle hub and brake assembly to get to what I needed. Was a pain but still better then taking off the entire pivot arm.    Axle bearings were already greased and in great shape thankfully. Got both leaf springs installed and its ready for the road again.   Probably going to have my electric brakes checked, I am not touching anything with the brake drums. Based on what I saw it doesn't look like my electric brakes have been working anyway. Brakes are nice to have if its slippery out
    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.