Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

How to work a Jerk Bait


Recommended Posts

October?? I cant wait for tomorrow because I get better looking every day smile.gif but with jerk baits i usually cast, let it sit for about 10 seconds and start my retrieve. I twitch and pause, twitch and pause until I get to the boat. Depending on the day, I very my retrieve with different speeds. Good luck fishin.

fishinfrenzy

Link to comment
Share on other sites

I'd add only one thing -- always remember to figure eight that jerk bait at the boat. Make it a long sweep alongside the boat, out sharply, and back. Even with jerk baits there will be viscious strikes on the good old figure eight.

Link to comment
Share on other sites

I prefer eractic snaps twitches, pauses, and jerks when retrieving a Reef Hog, Suick, etc.
Mixing it up seems to produce more strikes than follows. The main idea has always been to make the bait looking like a struggling, dying easy meal. A consistant rythmic retieve does not accomoplish this.
One more thing. Prevent yourself from going to fast. It's easy to get in this groove or mode especially after boating a fish.
Remember, covering alot of water VS. thouroughly cover a fair sized area can add up to a fishless day. Give them a chance, slow it down. I know this sounds like a Spring tactic but quite often it triggers fish in July, August and Sept.

Hope this helps

Terry
Terry's Guide Service
www.fishingmn.com/terry

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • 🤔as a recovering machinist!🤣🤣that must make me a recovering welder!
    • As a recovering machinist, I can appreciate that.  If the spec is 0.001 - 0.0015, then clearly the correct measurement is 0.00125, duh…
    • I just figured that it is easy enough to just get a 3 bank so when the boat is not in use I can keep all 3 batteries charged. I have not bough a charger yet, maybe I will give it some more thought. Edit: After thinking this over, with the size, weight, and heat output of the charger (as well as the cost) I think it makes sense to just buy a 2 bank charger, I have a smaller charger i can use on the starting battery when the boat is sitting at home. Forgive me, for i am a retired engineer and I have to obsess over everything...
    • Congrats on the motor!  I think you’ll like it.   I can’t say much on the charger location but I’ve seen them under the lid in back compartments and under center rod lockers.  160 degrees is more than I expected to hear.   Curious why you’re opting for a 3 bank charger with a 24V trolling motor.  Unless you don’t feel you be running you big motor enough to keep that battery up as well?
    • I did buy an Minnkota Ulterra, thanks for the recommendations. I had a bunch of Cabela"s bucks saved up, which helped. Now i need to get an onboard battery charger. Where do you guys mount these things in your boat? The manufacturer I am looking at {Noco genius) says tht their 3-bank charger will run at 160 degrees, seems like a lot of heat in an enclosed compartment? Thanks for any input on this.
    • You're very lucky a troop of Sea Monkey's didn't carry you away.   
    • Wasn't terrible at a state park beach. Antelope island maybe.  I wouldn't recommend it as a beach destination tho.  Figured I was there, I'm getting in it.
    • The water looked and smelled disgusting with hundreds of thousands of birds sh*tting in there.  About as gross as the Salton Sea. When I duck hunted there I didn't even want to touch the water.
    • It's kinda gross with the algae in the summer but I got in it anyway.  Wanted to see the increased bouyancy at work.  You can kinda tuck yourself into a ball and you'll just float with your head above water.  When dry off you look diamond encrusted with the salt.
    • We went to the flats too. I dipped a tire on the rental car onto it just to say I’ve been there,but it was still pretty soft from winter melt. After seeing some moron in a BMW suv get dragged out of the muck I had no intention of repeating his stupidity. 
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.