GoneFish'n71 Posted December 2, 2011 Share Posted December 2, 2011 I was thinking about building a lightweight darkhouse that i could slide in/out of my big house. Problem is the door is only 5'6" H x 4'5", and not sure if that is enough headroom to spear out of. Quote Link to comment Share on other sites More sharing options...
Spike76 Posted December 2, 2011 Share Posted December 2, 2011 Usually you can make anything work to go spearing, but when I made one only six feet ,I didn't like it. I would hit the end of the spears on the ceiling, so I shortened two spears. This made the spears lighter so they wouldn't hold the bigger northerns to the bottom. Quote Link to comment Share on other sites More sharing options...
Gordie Posted December 2, 2011 Share Posted December 2, 2011 Is it possible to lay the house on its side and push it in? I see alot of guys that put skies on thwe side of ther ehouses and tip them over to transport across the ice. A small spear shack doesnt have to be filled with every gadget you got. just a hole and your ready to go Quote Link to comment Share on other sites More sharing options...
GoneFish'n71 Posted December 2, 2011 Author Share Posted December 2, 2011 I could slide it in sidways, but then I can only have about a 4.5x5.5 floor, not sure if that would be large enough to be comfortable. Quote Link to comment Share on other sites More sharing options...
Gordie Posted December 3, 2011 Share Posted December 3, 2011 My perms are 4x5 and I cut a 28x42 hole plenty of room for you a heater and a spear.. lots of room the hieght is 6'4" to 6' Quote Link to comment Share on other sites More sharing options...
Gordie Posted December 3, 2011 Share Posted December 3, 2011 heres a couple pics of my floor 4x5 The painted pic is not the bottom but the inside or inbetween if you will Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.