HooknHorns Posted March 18, 2011 Share Posted March 18, 2011 Was thinking about upsizing deep cycles from 27's to 29's. The trays in the boat are 13 by 7 1/8. Looking at most of the 29 group batteries seem to be right at 13 inches. I have a few questions.Would my current tray be too tight?Should i cut the lip of tray off to accept the 29?After seaching I haven't found anyone who carries a 29 tray?Is it worth upsizing?Thanks for the help Quote Link to comment Share on other sites More sharing options...
311Hemi Posted March 21, 2011 Share Posted March 21, 2011 I am going through the same thing. I have series 27 trays and think I will just trim them and move them a little to fit the 29 series batteries. Since I have two, I will just trim the inside wall and use a little spacer to keep the batteries from rubbing. Quote Link to comment Share on other sites More sharing options...
CAMAN Posted March 21, 2011 Share Posted March 21, 2011 Attwood makes a 29/31 series trayJust google "battery tray 29" and you will find a ton of options. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.