Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

  • 0

On-Board Chargers?


BobT

Question

I’m considering adding an on-board charger to my boat. I would want one that could be left plugged in for maintaining batteries without damaging them too. What do you guys like or dislike about the ones you use?

Link to comment
Share on other sites

11 answers to this question

Recommended Posts

  • 0

As a follow up question, how many amps per bank should be considered to insure a full charge after a full day of fishing. I have a 12 volt trolling motor with 2 batteries hooked together and use the batteries most of the day, 12-15 hours per day.

Thanks

Link to comment
Share on other sites

  • 0

Dual Pro with 10 amps per bank. My first 2-bank one is 15 years old and still going. It does not have any mounting restrictions and only gets warm to touch. Some other brands say to leave so much air space around it, etc.

Link to comment
Share on other sites

  • 0

what kind of bank charger would a guy need to charge a 36v system?

3 bank, possibly 4 if you have a separate starter battery from your trolling batteries.

1 bank = 1 battery

Link to comment
Share on other sites

  • 0

We're looking at hooking up an MK-230 to Dad's boat in the next week or so. I've convinced him to throw an extra battery up front for his 12V TM. We've decided to run one bank for both batteries and just split the current at the battery selector switch he installed last year. We'll wire the batteries parallel and keep it 12V of course. The onboard charger should read/charge both batteries as one large 12V battery, correct? The only downfall is that it will take twice as long to charge 2 batteries as it will one. But 7.5 amps is still a good rate of charge.

Am I way off base?

Link to comment
Share on other sites

  • 0

Most guys over-estimate how many amps they need to recharge their batteries. It's a combination of how far run-down your batteries are and how quickly you need to have them recharged before you go out again. 10 amps per bank are very popular charges and a good way to go. Many guys could get by with lower amp chargers too.

I agree with the 1 bank per battery approach. The worst thing about splitting a bank between multiple batteries is that a bad or weak battery will keep the charger from properly maintaining the batteries. A charger that monitors each bank individually and has only 1 battery connected per bank will do the best job of keeping your batteries in tip-top condition.

I like Dual Pro chargers and that's what I have in my own boat. Minn Kota makes an excellent charger too.

On-Board Chargers At Pro Fishing Supply

Link to comment
Share on other sites

  • 0

I think I have owned them all, currently running a Minn Kota and works great, last was a Dual Pro and also a great one, only one I had a problem with was a Guest but it was several years old so maybe just wore out.

Link to comment
Share on other sites

  • 0

I appreciate all the replies. My brother-in-law uses a Minnkota and he really like his. After doing some research I'm inclined to support one of this site's sponsors and consider a Dual Pro Sportsman series. Thanks PerchJerker for the info.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Your Responses - Share & Have Fun :)

    • Yeah it was a beatdown
    • Your kid needs to stay with him!👍
    • My kid was eating in Beverly Hills and ran into this guy. Talked to him a bit and wished him luck in the game tonight.     
    • 🤔as a recovering machinist!🤣🤣that must make me a recovering welder!
    • As a recovering machinist, I can appreciate that.  If the spec is 0.001 - 0.0015, then clearly the correct measurement is 0.00125, duh…
    • I just figured that it is easy enough to just get a 3 bank so when the boat is not in use I can keep all 3 batteries charged. I have not bough a charger yet, maybe I will give it some more thought. Edit: After thinking this over, with the size, weight, and heat output of the charger (as well as the cost) I think it makes sense to just buy a 2 bank charger, I have a smaller charger i can use on the starting battery when the boat is sitting at home. Forgive me, for i am a retired engineer and I have to obsess over everything...
    • Congrats on the motor!  I think you’ll like it.   I can’t say much on the charger location but I’ve seen them under the lid in back compartments and under center rod lockers.  160 degrees is more than I expected to hear.   Curious why you’re opting for a 3 bank charger with a 24V trolling motor.  Unless you don’t feel you be running you big motor enough to keep that battery up as well?
    • I did buy an Minnkota Ulterra, thanks for the recommendations. I had a bunch of Cabela"s bucks saved up, which helped. Now i need to get an onboard battery charger. Where do you guys mount these things in your boat? The manufacturer I am looking at {Noco genius) says tht their 3-bank charger will run at 160 degrees, seems like a lot of heat in an enclosed compartment? Thanks for any input on this.
    • You're very lucky a troop of Sea Monkey's didn't carry you away.   
    • Wasn't terrible at a state park beach. Antelope island maybe.  I wouldn't recommend it as a beach destination tho.  Figured I was there, I'm getting in it.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.