Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

The End


Driftless

Recommended Posts

Small stream Wisconsin’s trout season closes the same time and day every year. This closing day seemed quite a bit like any other. The weather was perfect. It was a classic early fall day. The temperatures were in the low 60s and the leaves were beginning to fall and cover the water. The wind gusted at times and made our casts a little difficult. We did not care. It was the last day of the season and we wanted to soak in all of what nature had to offer. The closed season is five months here in Wisconsin and it gets really long because of the harsh winters and the urge to get out and wet a line is constant.

I met my buddy Aaron at a park near my home. Aaron drove all the way down to Southwestern Wisconsin from the Green Bay area to fish with me. Aaron had his cousin Cory along. We made out plan about two weeks ago. Aaron wanted to try for a big brown to put a punctuation mark on the end of the season. When were finished chasing browns he wanted to try for some brookies in full spawning colors.

We started at my favorite stream. It is my favorite because it usually gives up some big browns in late September. It is a snaggy mess with many log jams and oxbows. This would be a perfect place I thought for a season ending “Monster” brown. Cory and Aaron had the same basic rig. They had 6’6” medium action spinning rigs with 8 pound mono for line. Both of them were tossing stick baits. I have never had much luck with those and usually don’t use them. Cory had on a size 9 rapala and Aaron was using a size 7 rapala in the Vampire colors.

ef0e42e7.jpg

I was using panther martins on this type of water. I have not used rapalas in this manner before and wasn’t confident on the use of the rapalas. The two guys were picking up some decent browns in the structure and I batted clean up and was doing well too. We had timed the fish to take the entire morning but our plans changed about halfway through the morning. A car had parked half way between ours and started fishing in front of us. We all three were a little angry but I told them I had other place were could go. I am very polite when it comes to trout fishing etiquette. If I am infringing on some one else’s fishing area I leave. The two anglers cut us off but I decided that I would “not” be like them and be rude. We moved on to my second place.

The sun was already high in the sky and browns were hard to trick in the light conditions. Aaron managed to entice a large male brown in to coming out of it log jam and make a run at his rapala. It was a swing and a miss. There was no hook up. We decided lunch was in order. The bright sun meant it was time to chase brook trout after lunch.

After lunch we hooked up our fly rods and Aaron wanted to fish the stream I had recent luck on with brookies. Aaron had read the story in my blog about the 130 plus brookie afternoon and wanted a chance to do the same.

Two hours later we had our brook trout itch scratched. Between the three of us we land 45 brookies on pheasant tail nymphs. The colors on the brookies were almost neon. Aaron lost big brookie of the day. It was about a 14 incher. It got in to some structure and broke him off.

It was 3:30pm and we still had some time to fish. Aaron wanted one more chance at a big brown. He asked me to lead him to the stream in the area with the biggest browns I knew off. We discussed out options. Aaron brought up the story from my blog that was about 30 inch plus trout attacking and pushing another trout sideways. He told me that was the place he wanted to go. I had not been there in over a year because of the hard trek to the area and the constant rain in the area caused the main branch of the Kickapoo River to be dirty and high most of the year. Aaron liked his chances there and off we went to where Camp Creek empties in to the Kickapoo River.

On the way there I talked to Aaron about the rig he was going to use for the “Monster”. I told him I thought he was under gunned. I thought his 8 pound mono was too small of poundage to handle that big of a fish. Aaron was confident in his skills with his rod and I believe he truly didn’t believe me that a 30 inch plus brown could be possible in the Driftless Area. I explained to him the one Joe Chadwick had caught there went out in to the main channel of the Kickapoo River and it tired it self out. If the even bigger brown we spotted there a year or so ago was there, the only chance Aaron had to land this monster on 8 pound test was for it to go out in the main channel on a prolonged battle.

Aaron tied on his size 7 vampire rapala. Cory and I decided we would spectacle and I would be the net man if needed. We arrived at the area we wanted to fish. The sun was much lower in the sky and we felt good about Aaron’s chances. We went to the confluence of the stream and the Kickapoo River. We planned our final destination to be just downstream of where Camp Creek fed in to the Kickapoo.

We arrived at our site. The Kickapoo River was still up and dirty. Where Camp Creek emptied in there was a clean water halo in the main branch of the Kickapoo River. All three of us got excited when we saw that. When trout get really big in these parts they live in the main branch of the Kickapoo and they some times feed at the mouths and lay in the cooler cleaner water where the streams empty in. The clean water has more oxygen in it and it attracts bait fish and the other side effect is it attracts monsters to eat those bait fish.

We had a little pow wow before Aaron casted. We decided he should cast upstream and in to the dirty Kickapoo and bring his rapala out of the dirty water in to the clean water halo. Cory and I were kneeling in the tall grass to keep our profiles to a minimum. Aaron’s cast was perfect he worked his rapala out of the dirty water in to clear. It was pounded immediately. The trout hit and jumped all in one motion. The trout cleared the water by a good 2.5 feet. It was no more than 10 yards in front of us. Every thing seemed to go in slow motion. The “Enormous” brown was air born and I can picture it in my mind as clear as a snap shot. The trout looked to be 30 plus inches and it was a male brown in full fall spawning colors. It was a bronze color and I could see its alligator teeth and its over sized pointed elongated snout.. I could not see the rapala. It clearly engulfed it. The trout smacked down on the water and immediately ran upstream in to the main branch of the Kickapoo.

The battle was on. It ended quicker than it began. The line went limp and Aaron brought back an empty line. The line was not curly on the end. It was a clean break. The massive brown had either bit through the line or the line had a flaw in it.

We walked back to the vehicle. Aaron was beside himself. He had never had such a large trout on in his entire life. We discussed on the way to my vehicle how a trout that big actually existed in these waters. It could have lived there at that stream and the Kick its entire life and fed on minnows and any other small animals it wanted to. It could have been an escapee from some ones pond or it could have been a brooder released by the DNR. We were all certain on one thing. That male brown was the biggest small stream brown any of us has ever seen and maybe will ever see. Aaron called me three time from his cell phone on his way back to northern Wisconsin. He was babbling and was concerned about the trout having the rapala in its mouth. I asked him: “If you would have landed that trout would you have kept it?” He didn’t hesitate with his answer. “Of course I would have.” “That trout was 6-8 inches bigger than any small trout I have ever seen.” It didn’t comfort Aaron much. The season ended and Aaron has an experience that will haunt him for his entire life. You always remember the ones you lose more than the ones you land.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.