Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Frogs


gerty

Recommended Posts

Bomber Long A's and Rapala SW-J 13's are a good choice too. Smithwicks in the suspending Super rough model are always good in the fall. They use Teflon coated Excalibur hooks, they set very well on walleye. Big targets draw big fish. wink.gif

The Power Pro is a great choice. I use the #4/15 for most of my crank'n and the Hi-Vis #1/8 for jigs.

------------------
Backwater Guiding
"ED on the RED"
[email protected]
701-281-2300

Link to comment
Share on other sites

Ya i might invest into a few smithwicks I kinda like them.

What do you think about salmo line of cranks? What kind would you prefer? These are some spendy baits and some go for $9, so I want to make sure I get the right one. wink.gif

Thanks

------------------
Fish ON!

Link to comment
Share on other sites

Salmo produces very hi quality baits. As I am on their USA Pro Staff, I like them more then most. There are no better made Crankbaits in the world! The whole line is great and several models will be seen widely in the stores this season.

For shallow water application a few in the Salmo line I would highly recommend are the Whitefish, the Minnow, the Perch, and the Bullhead. They all offer deep running models but the shallow models preform very well in the fall on rivers and lakes.

Their toothy critter baits are incredible, a big hit for the walleye, zander, muskie and pike hunters all over the world. The new Slider is a huge hit this season, a very cool bait! Right Scoot? wink.gif

You can look the line over at the Salmo USA web site at this address.

www.salmofishing.com

The Salmo International home site is at this link. Be sure to hit on the English icon unless your fluent in Polish.

www.salmo.com.pl

------------------
Backwater Guiding
"ED on the RED"
[email protected]
701-281-2300

Link to comment
Share on other sites

Gotta love those big cranks this time of year. I fish a lot like BW Eddy does in the fall. Usually at night and shallow pulling cranks. Sometimes casting them too(especially if the frog thing is going strong).

Based on my morning walks there a lot of frogs around this year. They've been meeting their maker left, right and center on the roads the past two weeks.

I've been tied to home the past week and a half with my wife who had surgery. She's doing well and I hope to get out again this weekend.

You'll likely find me pulling lures.

------------------
I bad day of fishing??? I honestly don't know what you're talking about!

[This message has been edited by Borch (edited 09-19-2003).]

Link to comment
Share on other sites

Backwater Eddie
I see you must be a Power Pro fan.I just recently switched my jig pole too it(to much line twist with mono)How long have you been using it?Any comments about it?
Another thing i noticed when i bought it was the 10 and 8 pound test have the same 2 dia. seems strange! why bother with the 8 if the 10 is the same dia?
I tried fire line last fall i did not like it, when it was cold, it carried too much water and froze in the guides!Have you noticed any of that with Power Pro?
thanks

------------------
Try Too Fish
Forced Too Work!!:)

Link to comment
Share on other sites

I have been using Power Pro for about 3 years now.

What drew me to it was it's round smooth wrap. It's braid will not dig into the spool and cause FUBARS. Many other superbraids are liable to flatten out and cut into the spool like a knife, not good. With the even and smooth spooling caricaturists it will sail off the spool on a spinning rod or a baitcaster.

I found it to be the real deal for ice fishing and cold water jigging. The 8/1 and 15/4 has fast become my favorite on the ice.

It does not get "fuzzy" like others do, so this carries less water to the guides and they freeze up less. Power Pro does not absorb nearly as much water so that also helps prevent undue problems like swelling spools and roller guide freeze ups.

We will see a new Ice version of this by Power Pro line this season, even more ice friendly is the word. I found the existing thinner Power Pro line was no problem at all with icing. If it begins to form just snap the rod and it all pops off. The guides clean out at the same time, one quick snap..all gone.

I use the new Frabill Sensive line of ice rods and they have guides that tend to resist icing. So the Power Pro and Sensive combo is a sweet deal in my opinion. With that rig, you can feel a minnow fart in 20' of water, no problem. wink.gif

Then it cuts water better then mono, gets baits down deeper faster and with less resistance. The 15/4 has become popular with deep trollers. It is a good all around size for casting and trolling.

Superbraids will still shear off on sharp object or cut from shear type teeth like on a pike. When casting in pike infested waters it often pays to run a light wire seven strand leader. This will save on lost cranks due to hi-hits by toothy buggers. Walleye will not shear it, there teeth are not made to cut like that.

Good stuff, but not for all things at all times. A very good tool to add to your box of tricks when cranking or jigging.

------------------
Backwater Guiding
"ED on the RED"
[email protected]
701-281-2300

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.