Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Kennel floor...cement or dirt?


Guest

Recommended Posts

What are your opinions on dog kennel flooring?
Which is better, cement or dirt...pros/cons of each.
My personal opinion would be dirt is better...
not as hot/cold in summer/winter
prolonged standing on cement is hard on feet, ankles & knees(at least it is for people,not sure about dogs)

Link to comment
Share on other sites

Your opinion is correct. As long as you give the dog something to lay on instead of laying on the bare concrete you will be just fine. I like concrete because it is easier to clean up, doesn't get muddy, and keeps the toenails short! Just my 2 cents

Link to comment
Share on other sites

Dirt could look like a pig pen in time, plus pretty hard to clean. Theres another alternitive. Treated Plywood. After it has aged prime and paint it to keep the slivers down. Use bleach water to clean and disinfect then hose it off. Also keep your fence panels an inch and a half off the floor. It'll be eaier to clean and hose dog hair out.
If you can pick a location that is shaded by trees in the summer and sunny in the winter is best I believe for kennel location. This isnt always possible so a tarp works but you need large overhangs to shade the kennel. Without the overhang it is only shaded from the sun a couple hours during the day.
Prolly said more then you wanted to know or allready knew.

Link to comment
Share on other sites

There is a product out there just for this type of use.It is made out of rubber and has holes through it, kind of like the anti stress mats we use at work to help the feet while standing on concret floor.
I am not sure where I saw it, maybe Cabelas or Bass Pro?Check with a local Kennel, they should know about it.
Or do a search using a couple different search engines.
Benny

Link to comment
Share on other sites

The answer is a very definite neither. Build your kennel on stilts. The floor being 3 feet off the ground and the top being 51/2 feet off the ground. Make the box 4 by 4 for two, maybe 3,(depending on how they get along), dogs. Make the run 10 feet long out of kennel wire. The dogs will [PoorWordUsage] away from the box. What [PoorWordUsage] does'nt dry and fall through can be worked through with a garden rake or flushed with a hose. Spread lime underneath the wire run area to eliminate flies. Clean the run as often as possible to prevent the dogs from eating their feces. Compost the fecal matter. It has no soil nutritional valus but serves as a decent soil conditioner. This beats the expense and trouble of bagging it for the curb. Hindge the roof of the box to enable feeding and watering. Hindge and ramp the end of the wire run so the dogs can get in and out without lifting them out of the box. Once they learn that the food is in the box they'll run up the ramped end after a day on the trail. The young dogs will learn from the older dogs. You'll have no trouble getting them out. Yes the pups paws will go through the wire mesh. Don't worry, they'll adjust. The wire kennel run floor will toughen the feet of the dogs, eventually they won't even notice the wire floor. Pay attention to sun esposure,(or lack of), in the summer and winter.

Link to comment
Share on other sites

I forgot to add that the box is all plywood with plenty of, and frequently changed, hay. Keep the opening from the box to the wire kennel run about a foot or so square and covered with cloth stapled to the top of the opening to reduce heat loss during cold weather.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.