Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Methods of Finding Walleyes


Guest

Recommended Posts

#2 is it--If I don't see marks on my flasher or other indicators on my flasher that fish are present, I keep looking...sometimes it means moving to a completley different lake.

------------------
Chells

Link to comment
Share on other sites

Another thing to keep in mind when looking at the map before, is conditions. What is the water temp?? This will dictate what spots on the lake are the "A" spots for that time. What direction is the wind out of?? This narrows the structure you will want to concentrate on i.e. always start with the windward side of structure. What kind of bottom content?? Certain bottoms always hold fish while others will only hold fish during certain times. Time of year, though tied in with the first condition (water temp) this is also important for different areas of the lake. You don't want to concentrate on spawning habitat in august. As a rule, fish will start out shallow in the spring and gradually move deeper as the year goes on. Now there are always exceptions!! So don't come back with the story about the time in July you hammered em in the cabbage in 7ft. Some fish will always relate to weeds, no matter what time of year. Water temp can also be an indicater of Oxygen content, the warmer the water the less Oxygen content. Fish will move with cooler temps due to Oxygen content. I hope I haven't put too many things out there, but there is a lot to think about to increase your odds. The most important thing to remember is that fish are creatures of habit. They might surprise us from time to time, but learn the basic behaviors and you will become more successful.

[This message has been edited by Chris Haley (edited 06-04-2003).]

Link to comment
Share on other sites

What method do you use to find walleyes during open water?

1) Drive to a spot located on a map and fish in the pre-determined depth range until you find fish

-or-

2) Do you drive to a spot located on a map and use your electronics to locate fish... if there aren't any fish you move on to the next spot... and keep going with this method till you find fish.. more of a ice fishing method...

The guy I first learned to walleye fish from used method #1... and that's the method I've been using with limited success...

Any input you have would be appreciated...

marine_man

Link to comment
Share on other sites

Primarily #2, but I will stop and fish for a brief period most of the time if I any fish. No sign of fish, I'm gone.

I added 2 vexilars in my boat this year and I tell ya what, they WORK! I have a Lowrance LCG running right next to the Vexilar and the fish hardly ever show up on the LCG! The LCG will help me determine if what I see are weeds or not wink.gif

I should add that the flasher locates baitfish, and where there's baitfish I find eyes.

[This message has been edited by CD (edited 06-03-2003).]

Link to comment
Share on other sites

Buy a good map of the lake, if one is available. Many resorts offer simple maps of the lakes they sit on and are quite helpful in finding the humps, holes, and weedbeds. In open water you will find precious few landmarks so electronics coupled with any sort of map will be a real boost to finding the fish. As mentioned, water temp is another factor...not so much for finding preferred water temps of the fish, but to determine where you are likely to encounter the thermocline. If you skilled at reading electronics you will know how to find the thermocline using an lcr...if not just boost the sensitivity way up and look for a grayline above where you know bottom actually is. That false bottom is the thermocline and in the summer months the fish are more likely to be found near it during the daytime. Good fishing!

------------------
Sure life happens- why wait....The Crapster

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.