Best way to organize spoons

[Bigslugger]

Last year on LOTW my spoons took a beating on the snowmobile rides back and forth. I am looking for the best way from keeping the paint from scratching up on them.

If I recall, Dave Genz showed how he did it on a tube video, but I am unable to find it again.

Any Ideas/pictures would help greatly!

[Bobb-o]

Here is what i built for mine. I took a long plano box and dremeled out all the partitions. I then got some ripple foam from The Fly Angler and epoxied it into the bottom. Then applied some weather stripping to the top lid (an idea i stole from Chris Hanson at the TB mod gtg) It holds a lot of spoons, but i am gonna make another one for my panfish spoons. The one i saw genz had was a clear box that had foam cut to shape in each of the partitions and he pressed the spoons in the sides between the partitions and the foam.

[Swimbait2009]

That's slick bobb-o! Simple enough for a guy who's all thumbs too!

[Tom7227]

How about just putting some soft foam on the cover of the box so it compresses down and holds things in place.

[fishwater]

How about just putting some soft foam on the cover of the box so it compresses down and holds things in place.

That's pretty much what I use. I purchased 5 small boxes (very similar to the current clam jig boxers offered) that were labeled as gander brand fly boxes - they have foam on both sides of the case. I just hook spoons all in the same direction on one side and close the box.

Here's a pic with 3 of them loaded with lures I like to use up on LOW, minus the few tied to my rods..