Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Showdown thread


snotroket

Recommended Posts

I have Showdown and it has worked well. I was in a shack with a vexlar and with a push a button the interference was gone. It is easy to read and very quiet. It also shows your jig and fish without a problem.

Link to comment
Share on other sites

i have had mine now for 3 plus years and love it i had it from when it first came out as the vpg 3.2 version there were some glitchs in the beginning but then it even worked good just had some interference from the other units that was all then i had it flashed in brainerd to the 5.2 version couple years ago when only there outfitters were testing the 5.2 and that allowed me to zoom in to the 1 foot increments wich made me like it even more it has a half inch target separation,1000 watts rms 8000 peak and as for what danl had written its true me and my buddy go out all the time and both have em running in the same shack and with the push of the button there is no more interferance you can turn your noise level block to 10 sensitivity to 25 zoom with it and its back lite not to mention the 3 day battery life i would like to get another one for the misses or just to have as i heard they quit production really cant say enough about it and it has NEVER let me down wich is what i was after i just think that i works just as well if not better than the vex's but you will not be dissapointed i can promise you that

Link to comment
Share on other sites

I got one for my girlfriend to use and other people who fish with me that didn't have a flasher and also just for a just encase backup to my LX-5. Without getting into a ton of detail I can say I'm very happy with my LX-5 but found I used the Showdown 23 out of 27 times out they both work great I just seem to like the Showdown tish better then the lx-5, maybe because it's new and the newness hasn't wore off yet, we'll see what happens next year.

I can say if I had to replace my flashers with just one like if I lost them both or they got ripped off, I would hands down pick the Showdown because of cost if for nothing else I payed $550 for my LX-5 last year and got my Showdown for $250.00 on sale this year and they perform equally to me, other then the the showdown not having a dual beam transducer.

Link to comment
Share on other sites

hands down best flasher for the money. If you can afford a 55 or fl20, by all means get it. I have not had any problems with my showdown and just yesterday I custom rigged a small light to the side of my case. I even tried to rig up the marcum battery indicator, but I didn't like it. Great flasher, easy to read, no weird knobs to turn, and nice LCD display. I got the new software this year and I love it even more.

Link to comment
Share on other sites

I was wondering if the Showdown was technically still being produced or I had heard Aqua View was no longer and someone else bought out the company. Although the latest model does have the upgraded software. Maybe someone could shed light on that subject. Thanks

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • got this tackled today took about 3 hours to get both sides done. Didnt even get to use a torch....   Thought I was golden with just jacking it up and I could get to everything but no luck. Had to remove the entire axle hub and brake assembly to get to what I needed. Was a pain but still better then taking off the entire pivot arm.    Axle bearings were already greased and in great shape thankfully. Got both leaf springs installed and its ready for the road again.   Probably going to have my electric brakes checked, I am not touching anything with the brake drums. Based on what I saw it doesn't look like my electric brakes have been working anyway. Brakes are nice to have if its slippery out
    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.