Marcum 380 Fogging up

[WyoChris]

I bought a Marcum 380 Underwater Camera about 2 weeks ago. It has worked great for a few outings until the other day. The picture on the camera was a little foggy as I was out on the lake. Well, I took it home at the end of the day and tried it on my kitchen table and it still had a somewhat foggy picture. After looking at the camera itself, I noticed there is some condensation on the inner side of the camera window/lense which is causing the foggy picture. Has anyone had this problem before? Is there a solution to it?

One note - I accidentally got the camera itself a little too close to my propane heater the other day and a small part of it, about an inch away from the lense, got slightly melted. It just looks like some superficial damage, it didn't burn any holes or anything in the camera.... it doesn't look serious enough to cause any problems but who knows..

Thanks.

Chris

[minnbowhunter]

Chris, I had the same problem with mine, I found a very small cut in the cable a few feet from the camera. Marcum tech guys cut the bad part of the cable out and reattached it. They told me they had never had one come back where the camera was leaking without some kind of damage.