EW6 Posted July 28, 2009 Share Posted July 28, 2009 My power trim motor raises the motor but won't put it down. In fact the trim motor doesn't even run when you try to put it down. Do I have a loose wire issue or is there something else that could be wrong? Quote Link to comment Share on other sites More sharing options...
overdalimit Posted July 28, 2009 Share Posted July 28, 2009 relay. Quote Link to comment Share on other sites More sharing options...
marine_man Posted July 28, 2009 Share Posted July 28, 2009 Here's a post that explains it: Trim Goes Up but not down Once you've located the relays, try swapping them around.. if it'll go down but not up you've found the culprit. Not sure what you have for a motor, but for a Mercury:look on the starboard side of the motor, behind the plastic cover for two relays... they'll look like this: Swap the two around, and see if your intermittent problem changes to be up instead of down. marine_man Quote Link to comment Share on other sites More sharing options...
EW6 Posted July 28, 2009 Author Share Posted July 28, 2009 Awesome, thanks guys, I will check that out. Quote Link to comment Share on other sites More sharing options...
upnorth Posted July 30, 2009 Share Posted July 30, 2009 I just had the same issue and did the same thing. Mine wound up just being dirty connections. Quote Link to comment Share on other sites More sharing options...
baldrkpt58 Posted August 10, 2009 Share Posted August 10, 2009 I've had this happen on the lake and luckily I was able to just switch places with the relays and got back to the cabin. Now I keep two spares in the glovebox. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.