Guests - If You want access to member only forums on HSO. You will gain access only when you sign-in or Sign-Up on HotSpotOutdoors.

It's easy - LOOK UPPER right menu.

Sign in to follow this  
Followers 0
Big-Al

Cub Cadet 1045 or 1046

3 posts in this topic

I had pretty much made up my mind to purchase a X model John Deere, probably the 304 or 320. I backed off and decided that I did not need to pay twice the money to have twice the warranty. I started looking at the 100 series and realized fairly quickly that I then had to include other brands in my search.

Right now I am looking seriously at a Cub Cadet 1045 or 1046. they are $1650 and $1850 respectively. The 50 has the twin (Kohler) and I am leaning towards that.

Any arguments for or against this purchase? I appreciate any and all comments. This purchase is not coming at a good time for me, so I sure want to make the right one.

I cross posted this on the Equipment-Expert INformation forum also.

Share this post


Link to post
Share on other sites

I too just made the same jump. Was looking at the jds, but in the end picked up a cub zero turn. I sure like it so far. Less money and a three year warranty instead of two.

good luck

Share this post


Link to post
Share on other sites

Had a Cub Cadet, will be the last. Mower deck does not compare to a JD and the parts are not the easiest to find. There always seems to be a JD dealer in most larger towns. Just purchased a JD LA175. Great mower.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  
Followers 0



  • Posts

    • Had an 09'. Got rid of it. Also,  you could not keep the front end aligned.  Otherwise a very nice truck.
    • Helps when I comprehend what I read.  I actually just cut the handle off my tongue jack on my Yetti and welded on 3/4 nut too.  My M18 drill with 1,200 in-lbs (2704-20) and it has no problem raising or lowering the tongue.  Biggest thing I noticed was making sure my drill was on the #1 low speed setting.      As far as torque goes and harming your auger.  I think you are totally fine and shouldn't harm anything.  The max amount that these K-Drills and Clam plates are drilling these days with the big drills are 8".  Most sized augers these days have no problem turning a 10" auger which is nearly twice as large of an area than an 8" auger.  Being 2 strokes can normally operate in any orientation without being damaged the only concern I would have would be your gears and any shifting of grease inside operating the auger head on its side under load.    They say Ions will do 10" holes but after I talked to their customer service reps about it, I wouldn't trust an Ion with a 10" more than I do a wet fart.  Just the fact that they don't even sell a 10" package indicates there could possibly be issues with torque and reliability when operating the 10" auger "accessory".  For now I'd just stick to your strike master going up and save your Ion any extra wear and tear.  Maybe even ask Santa for some electric jacks this Christmas
    • As the media begins to draw a pretty picture about the November jobs report, namely that unemployment has dropped to 4.6 percent, its lowest level in nine years, they are unlikely to tell you the other part of the story. The labor force participation rate continues to decline and is stuck at a rate we haven't seen since February 1978, according to the Bureau of Labor Statistics.  It gets worse. Last month, we lost 4,000 manufacturing jobs, offering more damage to the already 301,000 we've lost since President Obama took office. - Town Hall   See for yourself.. U.S. Dept of Labor / BLS Date Viewer   Whaaa ???   OH, MY....  
    • I wouldn't do that for each one. I was wondering if you couldn't cut a winch down, or maybe just leave it as is, so you could attach a drill to the low speed post and tack weld/rig a socket or something for the other side and just hold it in your hand. It probably won't work because it sounds too easy. 
    • My, such big words!! Yer a talented liddle Smurf, aintcha? We might as well get to work doin' what we were accused of, munchkin!!! Like Carly Simon said, "no one does it better"....  
    • i,ve been falsey accused of inproprieties!!!!!!!!!!!
    • Ken W, I have that book too. Before the internet it was really tough to find info. about sausage making. I never had luck getting a tangy flavor using Fermento. The sausage was very good though.
    • Jacks work very smooth, fresh grease and by hand feels fine for the amount of weight.  I think for the winter we'll just use the gas auger up and the hand drill down.  I don't want to sink another penny into these darn jacks if I can help it, should be swapping out by next year.  I may look into the gear reduction but I feel like trying to throw one of them on each of the jacks could add another 100 that could go toward electric.  leech if you ever stumble on that video post the link so I can see what hes doing different.  Works great on the tongue when it can pivot on the wheels but when lifting the full weight of the house at the back two jack points it just doesnt cut it.
  • Our Sponsors