instrument panel 1700 lund angler

[bhs91]

My buddy just bought a used 2000 lund angler (tiller) and we are looking to switch sonars on there and we need to remove the instrument panel to get at the old wires, check for a couple shorts and remove the acorns that are stored in there. Any idea how this is done? I rmoved the screws that were in the front but the darn thing must be wedged pretty good up top. suggestions, tips...

Thanks,

BHS

[marine_man]

I presume you're talking about the switch panel, right?

Should be 4-6 screws and that's it. You may have to go in through the electronics locker (can't remember if that one has it) to see if something's binding up, or if you really can't figure it out, pull the deck ontop the switch panel to see what's going on.

marine_man

[bhs91]

Thanks, We will give it a whirl!

BHS

[TroutYammer]

Yup...what Marine_Man said. That should be all. My guees is that one of your switches is binding in the opening.