Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Recommended Posts

Hey everyone!

I have a timber rattler mallard call, and within the first ten min. of calling, it stick! How do i fix this problem for the future? Or do i just need new reeds? Any tips Or tricks to keep this from happening in the field?

Thanks and happy huntin'

Link to comment
Share on other sites

Don't spit so much in the call.

About all you can do.

You can turn it around and blow through the insert to clear it out on occasion, or run take it apart and pull a dollar bill between the reed and tone board.

Get good at taking it apart and tuning it in the field.

Link to comment
Share on other sites

Just curious, does windex really work, or just a guess? Just seems like if you put something wet on the reeds it would stick faster. Just my thoughts. Thanks for the tips though, ill try that, and the rain x , after i get new reeds and rough up the tone board a bit.

Link to comment
Share on other sites

Here are some tips...

1. Dont put products on your reeds...PERIOD

2. Hang the call on your lanyard so the reed is vertical, it allows the spit to run off the tone board.

3. Most important, Before blowing your call, place the tip of our tongue against your front teeth and inhale thru your mouth, youll feel a cooloing sensation in your mouth (Go ahead try it) thats the moisture being evaporated! = less spit in the call!

Good Luck!

Link to comment
Share on other sites

It is possible that your reed is wore out. My open reed howler only lasted 2 years. It worked fine in warmer weather, but anything below 10-15 degrees it froze up alot. I got new reeds and now its a champ again. Just a thought. Also keep them in you coat when you don't need them.

Link to comment
Share on other sites

If the reed gets bent at all that will also cause it to stick...my calls are all fairly old but I have only had one problem with a sticky reed and that was because it was bent. Otherwise I don't see why you'd be having problems...calls are designed to work when they're wet and in cold conditions. If you're having repeated problems just bring the call back and get a new/different one.

Link to comment
Share on other sites

I bought new reeds for my timber rattler and tuned it myself. got it sounding really good, but it too sticks after a while. Not quite as bad as before though. And iv'e been focusing on how much spit gets into the call, trying to minimize that. Dont know what else to do. Dont really feel like buying another call, they are not cheap. I'll bring it back to the store and see what he thinks.

Link to comment
Share on other sites

Don't put anything on your call, Rainex, windex, whatever, it doesn't work. Trust me I spit a lot into a call. Try out some calls that are stick proof. I got a Doc's DD-1 that absolutely DOES NOT stick. Doc Hull is the mans name.He'll take care of you. Buck Gardner also makes the spit-tech line of calls that don't stick either. I got a Double Nasty. Nice call. GUARANTEED not to stick or your money back. I own both of these calls and am more than happy with the non-sticking ability!

RAinman

Link to comment
Share on other sites

It is possible that your reed is wore out. My open reed howler only lasted 2 years.

Youre reed is not wore out, chances are if anything, you could use a new cork. My go to call is over 10 years old, original reeds, and I hunt over 40 days a season. Your reed is fine!

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • Yeah it was a beatdown
    • Your kid needs to stay with him!👍
    • My kid was eating in Beverly Hills and ran into this guy. Talked to him a bit and wished him luck in the game tonight.     
    • 🤔as a recovering machinist!🤣🤣that must make me a recovering welder!
    • As a recovering machinist, I can appreciate that.  If the spec is 0.001 - 0.0015, then clearly the correct measurement is 0.00125, duh…
    • I just figured that it is easy enough to just get a 3 bank so when the boat is not in use I can keep all 3 batteries charged. I have not bough a charger yet, maybe I will give it some more thought. Edit: After thinking this over, with the size, weight, and heat output of the charger (as well as the cost) I think it makes sense to just buy a 2 bank charger, I have a smaller charger i can use on the starting battery when the boat is sitting at home. Forgive me, for i am a retired engineer and I have to obsess over everything...
    • Congrats on the motor!  I think you’ll like it.   I can’t say much on the charger location but I’ve seen them under the lid in back compartments and under center rod lockers.  160 degrees is more than I expected to hear.   Curious why you’re opting for a 3 bank charger with a 24V trolling motor.  Unless you don’t feel you be running you big motor enough to keep that battery up as well?
    • I did buy an Minnkota Ulterra, thanks for the recommendations. I had a bunch of Cabela"s bucks saved up, which helped. Now i need to get an onboard battery charger. Where do you guys mount these things in your boat? The manufacturer I am looking at {Noco genius) says tht their 3-bank charger will run at 160 degrees, seems like a lot of heat in an enclosed compartment? Thanks for any input on this.
    • You're very lucky a troop of Sea Monkey's didn't carry you away.   
    • Wasn't terrible at a state park beach. Antelope island maybe.  I wouldn't recommend it as a beach destination tho.  Figured I was there, I'm getting in it.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.