Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

portables and wind


eyebjim

Recommended Posts

This may be a dumb question but how do you guys set up your portables with respect to the direction of wind. I have always been setting the X2 up so the back of it is into the wind. This way if you open the door the wind doesn't blow in. The problem I have is the wind comes in behind my legs so I have cold legs all the time. I am just wondering if anyone has a solution for this or if maybe setting up with the door into the wind would work better.

Link to comment
Share on other sites

I hate to disagree but I found with my frabill that if I angle the front/left corner into the wind, I am much warmer. Take that with a grain of salt tho, as when it is really cold and windy I really dont ever get out of the portable. No tipups for me on those days.

Link to comment
Share on other sites

I used to always face my Otter with the back to the wind, and everytime I got out of my chair the house would want to lift up (if it was really windy). Plus the wind blows in from both the sides and underneath the sled.

Last year I started facing it into the wind, which made no difference on how warm it was in the house. Also then you can put snow/slush on top of the canvas and that keeps it from lifting up.

Link to comment
Share on other sites

Back to the wind. If its really windy I set the ice anchors out the back of the house. My Otter has a inside liner that when banked with a bit of snow stops wind from entering through the back. I also use Snakors from www.soderbloom.com and they work great at keeping wind down and the canvas on the ground. I also dont have to worry about the snow slush freezing my house in when I use snakors.

One thing I noticed when really windy is if I get everything set in the house then turn the face to the wind its easier to take down the house. Otherwise the wind blows the canvas in my face and makes it hard to get the poles down.

Link to comment
Share on other sites

Thanks,

With the snow it should not be a problem. I was more referring to on bare early ice. I suppose I could drill a bunch of holes to make slush but with 3 inches of ice it takes a lot of holes and that cant make the ice any stronger.

Link to comment
Share on other sites

back to the wind, that breeze that comes in I just use as the safty for O2, I dont have a newer portalbe so if I go outside I have to lift the front up all the way and step out, doing this into the wind would cause my portable to totaly fold back and or slid away, I would rather have the wind push it back down. I also use the slush/snow to pack around the sides of the sled, especialy around the corners. I have never had problems with the wind coming from under my sled, I have always dug it down to the ice and then packed around the edges. If the wind shifts and comes from the side I have noticed who ever is on that side has a little less room to fish due to the fabric and poles being pushed in from the wind.

Just remember not to make those portables air tight, you dont want to go home early due to a headach.

ShawnnyB

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.