Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

TIPS: Catching Musky Through Ice


Guest

Recommended Posts

Here's a tip for all you hardwater anglers who are targeting me in ice fishing season.Because I feel sorry for you,I'll let you in on a secret.I've seen numerous fellow muskies caught this way.First drill a series of holes about 1/2 mile long.Next chisel out remaining ice between the drilled holes forming a trench.Tie on an 8" sucker lower it in one end of the trench then start running up & down the ice real fast(SAFETY TIP:BE CAREFUL NOT TO FALL,ICE CAN BE SLIPPERY AT TIMES!)This tactic is known as FOOT TROLLING.Even if you dont catch a fish at least you'll get a good cardiovascular workout,& my fellow fish-friends will get a good laugh,we have such little entertainment down here!Good Luck & Happy Trolling!Remember KEEP YOUR ICE HOLE CLEAN!BWAHAHAHA

Link to comment
Share on other sites

S M you have part of it right? confused.gif You don’t need a chisel using one of these grin.gifhttp://fishingminnesota.com/icesaw.html

& I doubt you would slip & slide with these on grin.gif

http://fishingminnesota.com/icegrips.html

Give us a report on how it works out for you & who is the fastest troller? rolleyes.gif

“FISH” grin.gif

Oops wink.gif you might need one of these also
http://fishingmn.com/bigdipper/

------------------
http://www.icesaws.com/

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • got this tackled today took about 3 hours to get both sides done. Didnt even get to use a torch....   Thought I was golden with just jacking it up and I could get to everything but no luck. Had to remove the entire axle hub and brake assembly to get to what I needed. Was a pain but still better then taking off the entire pivot arm.    Axle bearings were already greased and in great shape thankfully. Got both leaf springs installed and its ready for the road again.   Probably going to have my electric brakes checked, I am not touching anything with the brake drums. Based on what I saw it doesn't look like my electric brakes have been working anyway. Brakes are nice to have if its slippery out
    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.