Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

New Ice Scoop


captron

Recommended Posts

Got to give this NEW product a thumbs up or better yet all my fingers. It is the BIG Dipper Hockey Stick Ice Scoop, with a 30" ruler on the handle. I pick up 2 or 3 metel scooper every summer Walleye fishing. No way with the Big Dipper, it floats - I tried it. I banged it on the ice to clean out the shaveing and no bent or cracked scoop.No more sore back with this long handle or wet knees. Did not take long to clean my 10" ice hole with this baby. Folks it takes a lot to get me excited over a new product and I'm excited over this one.

------------------
Judd's Resort
fishingminnesota.com/judds/
Lake Winnibigoshish
Phone: 218-665-2216

Link to comment
Share on other sites

  • we are 'the leading edge' HSO Creators

Thanks Ron.

If you know Ron, he runs Judd's Resort on Winnie. He has a slew of Fish houses he runs. All need to have holes dipped out.

Ron has a refined eye for what works and what doesn't.

Click here if you would like to see what so many are so happy about having

Thanks Mark for a great ice fishiing improvement.

Link to comment
Share on other sites

I got to use my BigDipper this weekend (after I wrestled it away from my Dad). It works great. I like the wood handle which has better feel when you grap it with a wet hand then that cold steel. Plus the reach that you have - I can get the far hole in my house without having to get up or lean way over. Another bonus is that the plastic does not ice up either.

Now, I just wish I could have put the ruler to use.

Link to comment
Share on other sites

Dear fellow ice chippers, This is my first post and would like to recognize Rick and other fellow contributers for this forum which I read daily, I am planning trip a to Devils Lake N.D the week of Christmas.I am looking for the Hali dropper chains with the marmasooka jigs attached to the bottom ends. I have seen these advertised but cannot find them in Minnesota.The walleyes should be on a good bite as well.Any information would be much appreciated!!

------------------

Link to comment
Share on other sites

Hi all, Im relly glad that all you guys are happy with the way the Big Dipper works. I made these scoopers to do what I needed a scoop to do and just used the best materials I could find when I decided to produce them for sale. Thanks, Mark Edevold

Perch Searcher -- I saw Hali jigs and Spoons in Grand Forks at the Scheels Store on South Washington (across from the hospital) It's on your way to Devils Lake.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • got this tackled today took about 3 hours to get both sides done. Didnt even get to use a torch....   Thought I was golden with just jacking it up and I could get to everything but no luck. Had to remove the entire axle hub and brake assembly to get to what I needed. Was a pain but still better then taking off the entire pivot arm.    Axle bearings were already greased and in great shape thankfully. Got both leaf springs installed and its ready for the road again.   Probably going to have my electric brakes checked, I am not touching anything with the brake drums. Based on what I saw it doesn't look like my electric brakes have been working anyway. Brakes are nice to have if its slippery out
    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.