Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

ammo regulations


firebug

Recommended Posts

Proposed OSHA Regulation Threatens

Firearm and Ammunition Industry

The Occupational Safety and Health Administration (OSHA), the government agency charged with assuring the safety and health of America's work force, is proposing a regulatory rule affecting the manufacturing, transportation and storage of small arms ammunition, primers and smokeless propellants.

As written, the proposed rule would force the closure of nearly all ammunition manufacturers and force the cost of small arms ammunition to skyrocket beyond what the market could bear—essentially collapsing our industry. This is not an exaggeration. The cost to comply with the proposed rule for the ammunition industry, including manufacturer, wholesale distributors and retailers, will be massive and easily exceed $100 million. For example, ammunition and smokeless propellant manufacturers would have to shut down and evacuate a factory when a thunderstorm approached and customers would not be allowed within 50 feet of any ammunition (displayed or otherwise stored) without first being searched for matches or lighters.

NSSF and SAAMI have met with OSHA officials to explain the major problems the proposed rule presents for all levels of the firearms and ammunition industry. Furthermore, industry members requested a 60-day extension of the public comment period to conduct a more thorough review and analysis of OSHA's proposal. OSHA recently honored industry's request by extending the comment submission deadline to Sept. 10.

NSSF continues to urge all manufacturers and retailers of small arms ammunition, primers and smokeless propellants to submit comments on the proposed rule to OSHA. Industry members should inform OSHA that the proposed rule constitutes a "significant regulatory action" as defined in Executive Order 12866 Section 3(f)(1) in that it will clearly "adversely affect in a material way" both the manufacturing and retail sectors of the ammunition industry, productivity, competition and jobs and that the annual compliance cost for makers and retailers of ammunition alone will far exceed $100 million dollars.

All written comments submitted to OSHA must include the following information in the reference line:

RE: Docket No. OSHA–2007–0032

Comment on Department of Labor/OSHA Proposed Rule

"Significant Regulatory Action" as Defined in Executive Order 12866

Please fax the letter to the OSHA Docket Office: (202) 693-1648 (include the docket number and Department of Labor/OSHA on the cover sheet and in the reference section of your letter).

Please e-mail the letter by visiting: http://www.regulations.gov and following the submission instructions.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • got this tackled today took about 3 hours to get both sides done. Didnt even get to use a torch....   Thought I was golden with just jacking it up and I could get to everything but no luck. Had to remove the entire axle hub and brake assembly to get to what I needed. Was a pain but still better then taking off the entire pivot arm.    Axle bearings were already greased and in great shape thankfully. Got both leaf springs installed and its ready for the road again.   Probably going to have my electric brakes checked, I am not touching anything with the brake drums. Based on what I saw it doesn't look like my electric brakes have been working anyway. Brakes are nice to have if its slippery out
    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.