I have a 17' Mr Pike with 2005 suzuki 140 four stroke. The tach will show up to about 6500 RPM at WOT. I am running a 21 pitch prop. My feeling is that the tach is wrong. the dealers answer was to go from 18 to the 21 pitch. But in the same breath stated that the computer showed the engine had only been over 6000rpm for 2 minutes. I have little faith in the dealer any way. Any one have a similar experience? How can I be sure the tach is accurate?
Chamois passed away this weekend a couple days short of her 13th bday.
What a great dog to hang out with here at home and on distant adventures.
Gonna miss ya big time my little big girl.
If you really want to treat your wife (and yourself) with a remote operated trolling motor, the Minn Kota Ulterra is about easy as it gets. Auto stow and deploy is pretty awesome. You just have to turn the motor on when you go out and that the last time you have to touch it.
24V 80lb. 60 inch shaft is probably the right length for your boat. They ain’t cheap - about $3k - but neither one of you would have to leave your seat to use it all day.
Wanderer, thanks for your reply. I do intend for it to be 24 volt, with a thrust of 70-80. Spot lock is a must (my wife is looking forward to
not being the anchor person any more). With my old boat we did quite a lot of pulling shad raps and hot n tots, using the trolling motor. Unlikely
that we will fish in whitecaps, did plenty of that when I was younger. I also need a wireless remote, not going back to a foot pedal. We do a fair amount of bobber fishing.
I don't think I will bother with a depth finder on the trolling motor. I am leaning toward moving my Garmin depth finder from my old boat to the
new one, just because I am so used to it and it works well for me. I am 70 years old and kinda set in my ways...
Question
snakes
I have a 17' Mr Pike with 2005 suzuki 140 four stroke. The tach will show up to about 6500 RPM at WOT. I am running a 21 pitch prop. My feeling is that the tach is wrong. the dealers answer was to go from 18 to the 21 pitch. But in the same breath stated that the computer showed the engine had only been over 6000rpm for 2 minutes. I have little faith in the dealer any way. Any one have a similar experience? How can I be sure the tach is accurate?
Link to comment
Share on other sites
0 answers to this question
Recommended Posts